Accidentally stepped on true porcelain glue had not been dried, and trample is everywhere on the bath

In true porcelain of the construction process, sometimes will step on the foot true porcelain glue and don't know, on everywhere, sometimes stepped on sanitary ware, and stepped on wei yu true porcelain adhesive footprints are difficult to clean, China beautiful seam an agent factory beautiful seam below small make up to explain to you wei yu the footprints of true porcelain glue on how to clean up? First we prepare for the use of tools: 1, 2, 2000 watts of heat gun with wire strip a 3, wallpaper knife a 4, clean white towel two pieces of 5, a bottle of anhydrous ethanol and then we begin the construction steps are as follows: 1, first with a towel over the footprints part of 2, clean a towel tile in the footprints of part 3, open the bottle of anhydrous ethanol, pour it on the towel, towel wet all 4, applying heat gun with electricity, turn on the switch, switch to a second gear. Heat gun outlet is the towel and move back and forth, about a minute after heating, with a heat gun flat mouth parts on the towel, forcibly moved back and forth, until the stains 5, small residual points available fingers with towel scrub, until the little point to remove 6, end with a wet towel to wipe the final say about places we should pay attention to: 1, the heat gun heated outlet is very hot, to avoid scald 2, heat gun and towel together of the time is too long, towel dry up the anhydrous ethanol in time after 3, don't too hard, or use the blade row wei yu on how clean the footprints of true porcelain adhesive is introduced here wish I could help you.