Add water effect on the strength of epoxy grout have how old?

This article only to epoxy grout water added after elaborates the present status to, not on the grouting materials to other similar, such as concrete, this kind of material are generally in mixing station premixed good without secondary water treatment use. Then add water to the end how much one of epoxy grout, we will with plus and water amount is too small and too much water when epoxy grout after mixing state is formed by the two aspects to elaborates respectively, for standard, and what is the effect of construction. Epoxy cement grout water added in normal average of eleven percent. 5 - Thirteen percent, general manufacturer at the time of material factory will recommend water added annotations on the certificate of approval. Is probably the scope. Under the circumstances of less water added will be a state of mixing up, whole feels special glue, materials in the dry and wet state, at this time of the epoxy grout is impossible to use. No site that project can use. The solution is to add water, improve water added to recommend, so you don't have too much influence on the use of epoxy grout. This is less water added. Another case is the water content is too much, this kind of situation is commonly, field workers at the time of construction, casting up (slowdown time-consuming, add water and without through measurement tools to regulate water added to the construction. At this time of the epoxy grout presents a state of segregation, upper and lower layers, gelling material such as cement stone sinks, raw material precipitation floating above the water, the water flow through a good template only precipitation of cement stone. No strength cannot be frozen, unable to under a construction process. The solution is: use the standard measuring tools, to regulate water added, cannot be set out the hierarchical segregation epoxy grout to casting.