Advantages and construction steps of real porcelain glue beauty joint agent! -Beautiful seam agent factory

Real porcelain glue is a reactive two-component seam-filling product. It is suitable for all kinds of ceramic or stone building materials such as ceramic tile floors, ceramic tile walls, wash basins, bathtubs, toilets, kitchen counters, door stones, etc. The bonding and gap filling and beautification. The surface of the real porcelain glue is smooth and shiny after curing, and it is as hard as ceramics. The surface is not easy to be scratched, but it has the toughness that ceramics do not have. As a ceramic tile, it will not crack due to temperature differences. It has good gloss, wear resistance, water resistance, and mildew resistance. It is as easy to clean as ceramics. Its performance is far beyond the traditional beautifying agent and caulking agent (grouting agent). It is a high-quality decoration material.


Advantages and construction steps of real porcelain glue beauty joint agent!


Advantages of real porcelain glue beauty joint agent



.High brightness, high hardness. After curing, the luster is brilliant, beautiful and dazzling and hard as ceramic.



.No mildew, no blackening, no shrinkage, no sunken. It fundamentally solves the black and mildew problem of the existing tile joint sealant, and completely avoids the defect that the single-component beauty joint agent is easy to shrink and collapse and form grooves.



.Excellent stain resistance, scrubbing resistance, blistering resistance, acid and alkali resistance, and corrosion resistance. It has strong adhesion and can be used in the bathroom. It is anti-aging and maintains excellent characteristics.



. The bonding is firm and does not fall off. Beautiful seam agent itself is a kind of glue of special material, which is firmly bonded to the substrate after curing.



.Environmental protection product, simple operation, can be directly scrubbed with water. No need to paste masking paper, tape paper and other cumbersome procedures. The greatest possible reduction in harm to the human body.



Construction technology of real porcelain glue beauty joint agent



.Reserved brick joints: joints can be filled or not filled, if the joints need to be filled, the joint filling materials must be completely dried before proceeding with the real porcelain glue construction of the beauty joint agent factory, and the joint depth should be at least about mm;



.Clean up the gaps: Before using the real porcelain glue beauty joint agent, you should first vacuum the dust in the tile gaps, wipe both sides of the tile joints with a towel to remove dust, oil stains and other pollutants, and use a cleaning spatula Remove contaminants on the surface of tiles;



.Applying textured paper: If the tiles are antique tiles or pitted tiles, apply textured paper before stitching, and the surface tiles need not be pasted. When applying masking paper, the surface and crevices of the tiles should be kept clean and dry. Textured paper should be pasted on both sides of the gap. In order to ensure the effect of the cross, the horizontal and vertical line construction is recommended to be carried out in hours. The two sides of the textured paper should be cut neatly without burrs, and the width is not less than CM. The adhesive force should be good but the glue should not remain.



.Installation and sewing: choose the real porcelain glue of the desired color, install a special mixing tube, put on a special high-quality labor-saving glue gun, squeeze and remove the front end g real porcelain glue, so that the real porcelain glue can be fully mixed evenly. . When sewing, the mixing tube should be as vertical as possible to the tile surface so that the real porcelain glue can fill the gaps, and move forward evenly. Master the strength and frequency so that the real porcelain glue flows out evenly. Suitable temperature-degrees.



.Pressing seam and scraping seam: If you want the real porcelain glue of Meijiao Factory to have a moderate arc surface on the surface of each can after curing, you can use a special pressure seam steel ball to forcefully pull from one end to the other end along the brick seam. Use force to maintain uniformity; if you want to make the real porcelain glue behave as level as possible with the tile surface after curing, you can use a beautiful seam scraper or a soft rubber sheet to pull from one end to the other end to keep the force uniform, and Do not deviate from the textured paper to prevent contamination of the tile surface.



.Cleaning treatment: If the masking paper process is used, let it stand for one minute, tear off the masking paper, remove the surrounding real porcelain glue beautifying agent, and wipe off the remaining stains. If you use the process of non-sticking masking paper, wait until about an hour after sewing, and use a special cleaning shovel to clean the semi-cured real porcelain glue on the surface of the tile.



. Finished product protection: below normal temperature, hourly surface dryness, hourly use intensity, natural curing day. Avoid pollution, rain, water, and walk on the ground within hours after sewing.