Analysis of the reasons for the dirty and black tile joints and the corresponding treatment methods!

Analysis of the reasons for the dirty and black tile joints and the corresponding treatment methods!

Analyze the reasons for the dirty and black tile joints as follows:

1. The tile joints are slender and narrow, and the amount of filling agent (grouting agent) is small, and the moisture evaporation cannot guarantee good humidity and the curing conditions are not good.

2. The molecular clusters of the caulking agent (grouting agent) cannot undergo sufficient hydration and hardening reaction within 24 hours, and the surface roughness and strength will also be affected after curing.

3. The main components of the caulking agent (grouting agent) are silicate and oxide, and its chemical polarity is attributed to the hydrophilic molecular structure, which is its essential characteristic.

4. In daily life, water is often unavoidable on the ground, and dust cannot be avoided when entering and exiting. Water dissolves dust, dust and pollutes water.

5. The silicate molecules in the tile joints are absorbing dirty water all the time, so it accumulates day by day. If the tile joints are not dirty and black, it will be strange, and the tile joints are always absorbing dirty water, and there are countless sins. Mold that affects family health.

If the tiles are the face, then the dirty and black tile joints are acne. If the beautiful face grows with acne, is it a waste of a good face? Then, we spent a lot of money to buy good tiles to beautify the family, but use After using the caulking agent (grouting agent), it turned yellow and black soon, but what a pity we have good tiles, what to do!

Methods to solve the problem of dirty and black tiles:

Using a high-molecular compound beauty seam agent, the so-called high-molecular compound refers to those compounds with a relative molecular weight of more than 10,000, which are composed of many atoms or groups of atoms mainly combined by covalent bonds.

Characteristics of polymer compounds: Because of its high relative molecular mass, polymers are usually in a solid or gel state, and have good mechanical strength; and because their molecules are formed by covalent bonds, they have Good insulation and corrosion resistance; from the nature of the material, the polymer compound has the characteristics of waterproof, oil-proof, anti-fouling and anti-corrosion.

Advantages of selection of beauty seam agent:

1. There is a caulking agent as the bottom layer, and the concave surface of the caulking agent is flat.

2. Low requirements for fullness of gaps, such as facade walls. Advantages: low price and material saving. Insufficiency: The construction of the beauty joint agent is a little laborious, and the flatness of the bottom layer has a great influence on the effect.

3. Directly caulking of small seams with seam width less than 1.5mm.

So choose the beauty grout for tile grout! There are a variety of colors for you to choose from! After construction, the beauty joint agent is bright in color and delicate in color, which can well set off the luxury of the tiles. It is a personal companion for high-end tile decoration!