Beautiful ceramic tile seam an agent factory beautiful seam an agent of specific construction process

Wuhan beautiful seam an agent factory beautiful sewing factory today to tell you the ceramic tile seam an agent in the concrete construction process. First of all, let's introduce the construction of the necessary tools required: glue guns, scraper, a sponge, a towel, wallpaper knife, professional crack-cleaning tools: brush or a vacuum cleaner, bucket!

observation to understand the depth of the ceramic tile aperture width before construction, to prepare for the next seam work!

the first step, with our professional sundries in the crack-cleaning tool to ceramic tile seam, concrete, such as dust cleared out. And the gap filling depth ( About 0. 5 cm) Lateral wall of the clean-up, and then use the wallpaper knife, a more thorough cleaning ceramic tile is the purpose of the clear side seam of sundry, because of the presence of clutter will influence the effect of construction!

the second step is to use a vacuum cleaner or brush will crack in the clear out clutter, prevent dirt again fall into the gap, with a wet sponge or wet towel to wipe just clear aperture, wipe the dust on the side wall of the remaining, will on both sides of the ceramic tile seam gently wipe again, make ceramic tile surface have certain humidity, so that with the use of the scraper, facilitate cleaning, ensure clean ceramic tile surface after construction.

the third step, put the label of the bottom seam an agent, stick to the bottle, so that when use to identify agents in color. Beauty with glue gun or sewing machine sew beautiful seam an agent evenly into the ceramic tile, generally is firstly, backing with porcelain white, conducive to the seam an agent better bonding in the seam. First blunt when a direction, a direction play again in the other direction! Every used up to the beautiful seam an agent from the glue guns, the cutting down at the bottom of the seam an agent, so as to avoid agent material from the overflow bottle.

the fourth step, the beauty with scraper flat seam an agent timely evenly, scraping must maintain vertical scraper and ground, strength and medium, through the Angle of scraping board must be sideways, after blowing in a timely manner with moisture content 50% of the sponge to wipe clean overflow the beauty of the seam an agent, used a sponge can't reuse, you want to change the other side to wipe, and in a timely manner after wash clean again continue to use, keep clean ceramic tile seam on both sides, no residual material agent.

in step 5, just after the first pass porcelain white dry ( About two hours or so, generally a room for the first time follow up again from scratch is basic about the same) With a wet sponge or wet towel to wipe again on either side of the gap, make ceramic tile surface have certain humidity, so that the use of the scraper and clean up.

step 6, with the customer to specify the color for the second time the seam, use glue gun or the seam an agent evenly into the gap, maintain uniform discharge, every time used up the beautiful seam an agent from the glue guns, the cutting down at the bottom of the seam an agent, so as to avoid agent material from the overflow bottle.

step 7, the beauty with scraper flat seam an agent timely evenly, scraping also should be vertical scraper and ground, strength and medium, a scraper to sideways Angle Angle, so as not to affect another direction of crack. Wipe up spilled material with a moisture content 50% sponge.

the beauty that is wuhan seam an agent factory seam an agent manufacturers to share about the seam an agent, the construction process of the relevant contents of hope to be of help! Information for a more beautiful seam an agent, can log on to wuhan seam an agent factory building materials co. , LTD's website for more consultation!