Caulking completion acceptance criteria ( 7 let owner satisfaction)

Paying more and more accepted by the consumers as the demand for more and more big, but all kinds of construction process is uneven, so how do you determine test gap filling degree of success, stop in time, so as to safeguard the rights and interests of the owner?

whether empty drum ceramic tile

the caulking grout if choose material quality is not good enough, or ceramic tile piece of soaked and grassroots enough empty drum net will not result in ceramic tile processing. Horizontal

are usually slightly lower than the price of the ceramic tile, and in a horizontal line. Prevention of some local processing is not full, have collapsed, or collapse, that will affect the beautiful sex. So, available on foot in the construction of the ceramic tile aperture surface finish measurements, allowed error is less than 2 mm. If there is a bubble

caulking construction, appear bubble phenomenon is some, this may be related to material. A bubble, will be in a timely manner to deal with. Or seam pressure repeatedly, until the bubble disappear; Either remove this part of the bubble material, and then to the construction, ensure the gap filling effect is perfect.

if ceramic tile BengCi

in the cleaning process of ceramic tile aperture, pen knife or ceramic tile seam is easy to scratch, And some products are not enough flexibility, after curing BengCi can also lead to ceramic tile. So be sure to check carefully the tile gap or BengCi.

caulking surface whether level off

caulking to effect is good, first to see whether the crack surface is smooth. The smooth, of course, is not to see with the naked eye, had better use hand to touch feeling; The light is not smooth, hand touch felt that out. If the touch has the feeling of a bumpy, obviously, the seam pressure you to do is not good.

off color and not curing

product before use, always with a material, this is to prevent the front-end caulking produce color difference caused by the uneven mixing or curing phenomenon. In order to ensure material mix, best play more unused, at least to 40 cm or more. Especially a group of materials are used up, replace the new product, must will replace mixing tube as well.

cross and edge horn processing

processing ceramic tile edge cracks, cross, three-dimensional corner joint seam, and the processing of Yin and Yang Angle, are the key processing object. Seam smooth nature is the highest for caulking level requirement, must play full around the seams gap filling grout, the seam pressure processing again. Seam pressure, press it again from each direction, then off, gap junction outward seams to ensure that the level off, without any delay, and cohesion is very natural.

for the owner, can from the above 7 points for consideration. As master caulking should also be a complete set of caulking acceptance criteria, from a professional point of view, can let owner feel more intimate and professional. After all for the owner, zero experience of them, there is no way to judge of good and bad. And you the details of a casual, but enough to let owner touched, enough to gain their trust.

Kastar Adhesive Co.,Ltd. helps high-profile clients build strategic relationships that drive company growth, investments, funding and more. There are many make-or-break details involved in the day-to-day manufacturing within our company.

To reduce your production costs, get your and best grout sealer for porcelain tile from Kastar Adhesive Co.,Ltd.,you will get high quality warranty at favorable price in return. Visit Kastar Grout.

comes in a vast array of styles and floor grout sealer depending on which professional groutis used.