Caulking construction of six steps never go wrong, the consequences are serious, be sure to remember

Caulking construction actually not difficult, many owners will try to choose their own construction, at the time of construction for the first time, don't keep in mind that there are 6. The 6 mistakes easily, take a look at.

a, construction environment humid

no matter the owner to buy what kind of gap filling Kastar grout, oil, water, or at the time of construction, construction environment must keep clean and dry. If encounter MingShui caulking agent before curing, aperture is damper, can appear not stem, pluck up, white. In order to be able to guarantee the smooth construction of caulking gun, all make sure dry environment.

2, ceramic tile aperture is not clean up

the depth of the ceramic tile aperture and clean degree is also very important, in the gap before construction must be removed, avoid dust affect curing of caulking agent. There is dust or impurities and aperture, and can also affect the adhesion of gap filling agent, especially ceramic tile profile must be clean, otherwise it will cause the caulking agent fall off.

3, glue before emptying

double group of caulking gun at the time of use, curing Kastar grout and pigment are mixed in the hose, just hit the caulking agent without mixing, not cure can't be used. General advice from the hose of 40 cm vent is not used, some owners feel waste, don't vent and then use, then you will find, the caulking no matter how long time will not cure.

4, coarse ceramic tile stick crepe paper not

on the smooth surface of the ceramic tile can directly do caulking, but the rough surface of ceramic tile must be labeled in advance, crepe paper or caulking on wax. Because the viscosity of caulking agent is very strong, shovel easily hurt when glazed ceramic tile glue, especially when doing the caulking wood grain brick, be sure to pay attention to this problem.

5, forget pressure seam

some owners waiting for caulking agent directly after finished rubber curing, forget and pressure this step. Actually seam pressure is very important, not only can let the caulking agent fill the gap, can fill a crack in the broken seam an agent and connection, on the surface of the shovel glue more relaxed. Pressure rubber at the same time to ensure that gap filling surface roughness, absence of concave and convex, very beautiful.

6, prolong shovel gum

the shovel of caulking agent gel time, put the ceramic tile of crepe paper need to be in seam pressure after 15 minutes of tear, crepe paper didn't stick the ceramic tile of crepe paper, caulking agent such as need to shovel glue after curing. will spare material shoveling, after curing for caulking agent curing the harder the longer, the shovel glue will be hard for you, don't think shovel it doesn't matter later.

tile grout is not something to be ignored or taken for granted. It is there to keep your grout waterproofing sealer comfortable year round. To find a cost effective solution, turn to Kastar Adhesive Co.,Ltd..

Get cost effective and professional bathroom grout sealer advice for your solution at Kastar Grout. Kastar Adhesive Co.,Ltd. expert is your first choice!

Did I make the right decision? Am I saving money? Would I do it this way again? Yes, yes and yes if you choose to visit Kastar Grout and make your enquiry.

Diversifying is an excellent growth strategy, as it allows Kastar to have multiple streams of income that can often fill seasonal voids and, of course, increase sales and profit margins.