Ceramic caulking agent construction tutorial, learn to do it yourself, after simple and fast

The seam construction of a total of four steps, comprises crack-cleaning glue, glue, seam pressure, a shovel, one of the most trouble is clear, because this is the first step to do the seam, and most important step. So beautiful seam construction specific how should operate, take a look at the construction course.

a seam,

the clean up of aperture has certain method, if the tile on the gap filling agent, you will need to sort out with a shovel knife gap filler inside; Do the seam reserved if ceramic tile aperture, no filler, just need to use a brush or a vacuum cleaner, will clean up the inside of the dust. Seam in clean, never use water to clean, beautiful seam need to dry, wet gap will make ceramic filled seam an agent.

2, sizing

1. Discern ceramic tile: before sizing, need to distinguish whether smooth ceramic tile, matte tile need to affix to crepe paper sizing, smooth surface can be directly glue;

2. After emptying colloid: according to the hose, need to 40 cm long colloid without, each group of new glue need before using, if just changed the way the new hose, also need to be empty again, avoid ceramic caulking agent did not mix not curing;

3. Glue: ceramic filled seam an agent need to rely on glue gun to glue, press the glue guns don't always hard, a pressure back a lot easier, and glue guns moving speed not too fast, to ensure that the crack in the play the full ceramic filled seam an agent.

3, seam pressure

1. Planar pressure seam: sewing tools has a lot of kinds, seam pressure ball and seam pressure plate, the most common seam pressure to let the surface of the ceramic filled seam an agent of aperture and ceramic tile is not together, also should pay attention to don't back and forth again and again pressure, this will lead to uneven force, ceramic caulking agent surface roughness has a deviation.

2. Pressure Angle seam of Yin and Yang, Yin and Yang Angle seam pressure is difficult, need special seam pressure tool, internal Angle tool specifications typically smaller, Yang Angle can try to do rounded corners, boxer.

4, plastic shovel

wait for ceramic tile ceramic filled seam an agent after dry can shovel glue, as long as with the shovel can gently off, but if the rough surface can't do, a great trouble to clean up. But with the ceramic tile of crepe paper, can be in the seam pressure torn off after 10 minutes of crepe paper, don't go, don't wait for curing will be very hard and difficult to clean up.

with the construction course, practice a few times, oneself at home do the seam less of a problem. Of course, don't forget to buy quality assured us sewing products, so as to make the seam to achieve the best effect.