Ceramic tile adhesive construction technology of 1, the first after primary of ceramic tile the reverse side is clean, check and paste base level. Base should be firm, smooth, clean, pollution-free, loose materials, empty drum, such as a curing grout, release grout, a smooth concrete surface after polishing rough construction. 2, before the shop is stuck, should also commit suicide by hanging vertical leveling layer in metope, in order to determine the out wall of ceramic tile lines, and horizontal line, this is can do smooth when the shop is stuck, and can do horizontal flat vertical ceramic tile. To ensure that the base should be firm, smooth, clean, pollution-free, loose materials, empty drum, such as a curing grout, release agent, a smooth concrete surface after polishing rough construction. 3, with 25 kg of artisan ceramic tile powder in water is about 7 ~ 7. 5 kg, with an electric mixer to form a uniform particles of mucilage, placed 3 ~ 5 minutes to stir again. Bonding material shoulds not be too thick, otherwise it is not easy to spread out, at the same time also shoulds not be too thin, tile paste can't fixed, easy to fall down. 4, the mucilage with tooth type scraper evenly onto the working plane, each with about 1 ㎡, then put the ceramic tile and pressure to the work surface. 5, such as to back groove deeper ceramic tile or stone material, and application of tooth type scraper apply glue paste on the back of the tile, so as to ensure full slurry paste. 6, according to the whole metope ceramic tile pollution condition, the available surface water scrub.
note 1, appropriate construction temperature is 5 ~ 40 ℃, construction to confirm before verticality and roughness of substrate. 2, avoid by all means will have hard paste slurry and water mixed with, brick surface residual mucilage clean up immediately with a slightly damp sponge. At least 12 hours after 3, construction to prevent rain, sun, and the frost. 4, for the old ceramic tile or stone material surface, and should be confirmed before plane such as gypsum paste base the original adhesion strength and wall body strong degree, must be conducted in large area before construction paste test before using.
Kastar Adhesive Co.,Ltd. will continue to build a corporate culture that respects and values the unique strengths and cultural differences of our associates, customers and community.
Kastar Adhesive Co.,Ltd.’s core aim is to afford high-quality products with the concept of manufacturing technology.
We persevere in keeping the customers pleasant and supporting them with tile grout at a reasonable price.
Contact Us
Better Touch Better Business
Contact Sales at Kastar.
Call Us
+86 13924533378