Ceramic tile adhesive using method and construction process

Step 1: first of all to clean up after primary of ceramic tile on the back, and check the paste base level. Base should be firm, smooth, clean, pollution-free, loose materials, empty drum, such as a curing grout, release grout, a smooth concrete surface after polishing rough construction. Such as the base is not strong, not smooth, please advance with cement mortar leveling. ( Tip: the more level off, the metope of the tile is more convenient. )

step 2: first the need of water poured into the mixing barrel ceramic tile adhesive mixing proportion: 20 kg ceramic tile adhesive + ( 4 - 5) Kg water

step 3: the ceramic tile adhesive powder slowly in the mixing barrel. Ceramic tile adhesive mixing proportion: 20 kg ceramic tile adhesive + ( 4 - 5) Kg water ( Tips: please don't in ceramic tile adhesive and add any products, such as cement, etc. , such as the need to strengthen the cohesion, can only use special ceramic tile adhesive strengthening agent)

step 4: and ceramic tile glue into the water, and stir until evenly without particles, no precipitation of paste, quiet place for a few minutes and then stir slightly, can begin tile below.

step 5: please use during the construction of professional 'tooth scraper' batch of scraping the mucilage evenly on the work surface, each batch of about 1 square construction surface. ( Tip: tooth blade usually use two types of specifications: 6 cm and 10 cm)

step 6: use a 'tooth type scraper' wipe the scraping of mucilage uniform base on the back and on the surface of ceramic tile to tile after operation. ( Note: the ceramic tile back generally have dust, please wipe the dust blowing ceramic tile adhesive. )

step 7: ceramic tile ceramic tile with the hand rub pressure when the situation, or use the rubber hammer tap to adjust the parallelism of ceramic tile.

step 8: in order to guarantee the parallelism of ceramic tile is recommended to use level and the tile with a cross.

step 9: after completing the above process for cleaning, ceramic tile construction completion, the stability of the caulking after waiting for 24 hours.

the whole process of ceramic tile adhesive tile is finished, the standard of the construction method can make the tile time, in the original tile day 5 square up to 30 square, greatly save the precious time, and ceramic tile adhesive tile is safer than cement tile, cohesive force strong, anti-aging function, prevent the old room wall ceramic tile, the phenomenon of the empty drum, fell. Also can achieve certain waterproof effect.

tile grout is an inevitable and critical part of being a manufacturer, and it's more complicated than just manufacturing products and serving customers.

Kastar Adhesive Co.,Ltd. offers the best products, high-quality services and innovative technology.

People tend to want what they perceive they cannot have. Making Kastar seems exclusive or as if it will go out of stock if they don't act quickly often makes it more enticing to the consumer and increases the likelihood that they will buy in.