Ceramic tile aperture is too small to sew ( Need more gap? ）

Will leave gap shop sticks ceramic tile, only the width and depth are not necessarily, some owners in order to avoid future gap blackened, seamless splicing. Seamless splicing is not really leave no gap, just aperture is small. That gap is too small can do the seam? We usually have the two different way.

the first expanding gap

if the gap is only 1 mm, the owner want to do the seam, can choose to slit, will crack the inside is clean, especially the gap on both sides. Under the condition of without breaking the ceramic tile glaze, professional crack-cleaning can crack clean up very clean, this gap will look a lot wider than before, the beautiful stitch can do at this time. When do the seam, but also choose toughness good water-based beautiful seam an agent, water-based beautiful seam an agent not only environmental protection, with tenacity and hard, will not affect the heat bilges cold shrink of ceramic tile. When the glue hose oblique mouth can be a little bit small, incision cover ceramic tile aperture, can seam an agent into the gap.

the second is to recommend epoxy sand texture

if you find 1 mm gap difficult to break into the seam an agent, you can choose a relatively simple construction epoxy color sand, its operating mode and scraping putty powder is the same. Use color sand mixing, scraping plate into the gap of, no matter how wide and how deep cracks after playing a full redundant color sand will overflow aperture, with scraper scrape can be reused. Epoxy color sand construction not much skill, and it's easy to fill in the gap, the owner can choose this kind of beauty in need sewing products.

and it is not recommended to do the sewing, if the gap is less than 1 mm, not recommended to do the seam. Because ceramic tile is in use when need space for heat bilges cold shrink, below the 1 mm gap can only ensure the normal use of ceramic tile. If add the seam an agent, the space may be insufficient, will lead to ceramic tile arch camber, and the gap is too small, the seam an agent it is difficult to play in.

recommended articles:

small ceramic tile aperture can do the seam?

tip: the seam construction seam pressure ( Beginners must see)

the seam looks better leave much gap ( How much of a gap? ）

1 mm sewing skills ( 1 mm can do the seam? ）