Ceramic tile aperture too deeply how to stitch ( Caulking? ）

Will leave gap shop sticks ceramic tile, only the width and depth are not necessarily, some owners in order to avoid future gap blackened, seamless splicing. Seamless splicing is not really leave no gap, just aperture is small. The gap is too deep seam can do beauty? We have these three general practice.

do epoxy sand texture

if gap is too deep, can choose a relatively simple construction epoxy color sand, its operating mode and scraping putty powder is the same. Use color sand mixing, scraping plate into the gap of, no matter how wide and how deep cracks after playing a full redundant color sand will overflow aperture, with scraper scrape can be reused. Epoxy color sand construction not much skill, and it's easy to fill in the gap, the owner can choose this kind of beauty in need sewing products.

do caulking

1, full fill construction full fill in ceramic tile aperture is empty, nothing inside, direct to fill the seam an agent, usually 2 - need to do Three times, and even more times. The price is according to the materials to calculate, so 2 - is half filling cost More than 3 times.

2, half fill construction fill half filled with caulking agent filled first, and then use the seam an agent, called half fill construction.

gap too deep don't recommend to do the seam

if the gap is too deep, or not to recommend the seam. Because ceramic tile is in use when need space for heat bilges cold shrink, below the 1 mm gap can only ensure the normal use of ceramic tile. If add the seam an agent, the space may be insufficient, will lead to ceramic tile arch camber, and the gap is too small, the seam an agent it is difficult to play in.

recommended articles:

ceramic tile aperture is too small to sew ( Need more gap? ）

the seam before how caulking ( A look at will understand)

how ceramic tile seam ( Teach you don't spend money again) Don't do

home ceramic tile seam ( Penitence dead you)