loading

Professional manufacturer of tile grout and adhesives with 27 years experience

Ceramic tile ceramic caulking agent construction method and matters needing attention

Ceramic tile ceramic caulking grout construction seems very easy, just a few simple steps, but need to pay attention to the details of the many, not sure if good, will affect the final construction effect. Everyone in ceramic caulking agent construction should be paid attention to the following:

1. Everyone should try to choose good, the weather and the temperature is relatively high construction temperature is usually 5 ~ 35 is better, please don't outdoor use in rainy day.

2. All ceramic tile surface should be clean before construction: dust cleaning the inside of the ceramic tile aperture, make a vacuum cleaner or he will sweep clean, need to make sure that no damp in ceramic tile aperture; No dust, particles.

3. Good but should also grasp the ceramic caulking gun construction order: after the first transverse vertical, clean up the grooves on both sides to show ceramic tile edge line of ceramic tile aperture; Pay attention to ceramic tile cross intersections need clean; Ceramic tile aperture to ensure a clean, dry; If not clean, ceramic filled seam an agent do not; If wet, do not firm ceramic filled seam an grout, ceramic filled seam an agent before, need to be on both sides of the cracks in the ceramic tile ceramic tile surface paste, crepe paper and crepe paper brick parallel seam.

4. Everyone in open ceramic filled seam an agent should also pay attention to the discharging mouth in case of injection to the ceiling, metope; Discharging mouth width is almost consistent and the seam width, so you can ensure that the fabric can be fully covered the base.

5. If you are a novice, suggest to play 20 cm 50cm; Gradually after skilled, can play longer length, a gun when the glue guns flat, discharging mouth below material plate catch; Caulking when discharging need even less not more easily, note a long 1 m and scrape to evenness immediately, can not blow over a period of time again, the ceramic part lack ceramic brick joints of caulking agent filled seam an agent to fill again when cleaning.

6. In cross interface more small brick to apply in the first vertical seam, then apply the principle of the horizontal seam, met cross intersection, ceramic injection after caulking grout to here should skip the blow gently, make ceramic less caulking agent into the cross stitch. Cross brick joints seam width should be consistent, should use a plastic cross positioning, otherwise affect beautiful.

7. Ceramic caulking agent construction needs in a timely manner after screeding off crepe paper, after a long time easily uprooted seam in ceramic filled seam an agent. It is worth noting: each finished once expected, the discharging mouth tape seal to prevent excessive material waste, to tick off seam when discharging mouth with a little since the material overflow, can use paper erasure.

Kastar needs to be able to reach social users in a way that complements what the brand is doing if they want to succeed at social commerce.

Kastar Adhesive Co.,Ltd. will provide branded products and services of superior quality and value that improve the lives of the world’s consumers.

Consumers like these are interested not just in tile grout they will spend their money on, but also in the human and environmental impact of the supply chain that produces those goods.

Kastar Adhesive Co.,Ltd. knew if this worked for us, it would work for others, so we took the exclusive product and program and re-developed it to be more accessible to customers.

GET IN TOUCH WITH Us
recommended articles
Knowledge APPLICATION NEWS
Sealant Composition and Function

Sealants are commonly used in construction and home improvement projects to fill gaps and cracks, providing a watertight and airtight seal.
Every successful project needs purpose-built solutions to ensure efficiency, effectiveness, and overall success.
Contact Adhesive Safety Guidelines: What to Follow

Contact adhesive is a versatile and widely used adhesive that is commonly used for bonding materials such as wood, metal, and plastic.




What is Contact Adhesive?

Contact adhesive is a type of adhesive that is widely used for flexible bonding applications.
In today's highly competitive market, businesses are constantly looking for ways to bring innovative products to market faster and more efficiently.
no data

Contact Us

Whatsapp : +86 13924533378
Wechat : +86 13924533378
Tel : +86 731 89870169
E-mail : sales@kastarsealant.com
Address: No.1, ShunJing Road, Songxia Industrial Park, SongGang Town, Foshan, China

Better Touch Better Business

Contact Sales at Kastar.

Call Us

+86 13924533378

Copyright © 2025 Kastar adhesive Co.,Ltd. | Sitemap
Customer service
detect