With the seam is gradually accepted by market, the demand is increasing, but the various construction technology is uneven, so ceramic tile ceramic filled seam an agent after construction how to check whether qualified? Stop in time, so as to safeguard the rights and interests of the owners?
the joint surface is smooth,
the seam to effect is good, the first thing to see if the seam surface smooth. The smooth, of course, is not to see with the naked eye, had better use hand to touch feeling; The light is not smooth, hand touch felt that out. If the touch has the feeling of a bumpy, obviously, the seam pressure you to do is not good.
horizontal
are usually slightly lower than the price of the ceramic tile, and in a horizontal line. Prevention of some local processing is not full, have collapsed, or collapse, that will affect the beautiful sex. So, available on foot in the construction of the ceramic tile aperture surface finish measurements, allowed error is less than 2 mm.
if there is a bubble
the construction joints, the bubble phenomenon can be some, this may be related to material. A bubble, will be in a timely manner to deal with. Or seam pressure repeatedly, until the bubble disappear; Or remove this part of the bubble material, and then to the construction, to ensure that the joint effect of perfection.
the color difference and curing problems
the product before use, always with a material, this is to prevent the front seam caused by uneven mixture of beauty off color or curing to the phenomenon. In order to ensure material mix, best play more unused, at least to 40 cm or more. Especially a group of materials are used up, replace the new product, must will replace mixing tube as well.
cross and edge horn processing
processing ceramic tile edge cracks, cross, three-dimensional corner joint seam, and the processing of Yin and Yang Angle, are the key processing object. The level of joint smooth nature is to us the highest requirements.
must play full around the seams ceramic gap filling agent, the seam pressure processing again. Seam pressure, press it again from each direction, then off, gap junction outward seams to ensure that the level off, without any delay, and cohesion is very natural.
empty drum
if choose ceramic caulking agent material quality is not good enough, or ceramic tile block soaking is not net and basic level processing will lead to empty drum occur ceramic filled seam an agent. If such problems, be sure to find out the reason.
if ceramic tile BengCi
in the cleaning process of ceramic tile aperture, pen knife or ceramic tile seam is easy to scratch, And some products are not enough flexibility, after curing BengCi can also lead to ceramic tile. So be sure to check carefully the tile gap or BengCi.
Contact Us
Better Touch Better Business
Contact Sales at Kastar.
Call Us
+86 13924533378