Ceramic tile gap filling construction problem causes and solutions

Caulking industry has been increasingly popular in recent years, people use more and more. Gap filling effect is beautiful beautiful, many people like in the home when decorating, use caulking product, improve the grade of the decoration effect. Resulting in construction process will appear all sorts of problems, some problems such as not just the quality problem of product caulking, summarizes several common problems and solutions today, hope to be of help.

problem a: gap filling with lighter than the original color is white, white mist.

the reason analysis:

appear such circumstance may be the environment humidity is too high, the surface of the construction, containers, mixed with water in the gap, gap filling agent. Or the underlying caulking agent containing water not clean. Can also be used for poor gap filling agent, because transparency problems pale.

countermeasures:

don't construction when humidity is high, through dry processing before construction.

the surface to clean, do not touch the water.

the bottom seam filling agent or ceramic tile aperture water to dry.

problem two: due to poor adhesion, adhesive, to produce loss, peeling, the drum, peeling phenomenon.

root cause analysis:

caulking agent inferior, resulting in poor adhesion between the layers. Backing with caulking grout is too dry, even as the state of powder, still itself will have a very strong water imbibition, if again meet caulking layer is thin, often will seriously affect the caulking gun curing effect and caking property, so that the construction surface peeling, fall off. Or gap impurity, stained with oil, water or other contaminants. Use inferior caulking products. Construction temperature too low.

countermeasures:

choose good quality caulking agent render.

to make the oil base material surface treatment, water or other contaminants thoroughly remove.

select high-quality caulking caulking products manufacturers, cohesive force is strong, don't fall off, do not collapse.

question 3: after a period of time, still not dry, not hardened.

root cause analysis:

A/B two components mixture of uneven. Front-end not play during the construction of about 20 cm is expected to fail. A new material has just started with A glue gun there will always be A, B two tube side out first, then mixing is not uniform, if the waste of 20 cm don't throw away into the seam will lead to products not curing. Workers in filling, occasionally in the hose into the air in AB the capacity of the two groups of imbalance, this case will be intermittent not cured or local curing phenomenon. About 20 cm material and fail without if mixing tube hole is too small, can also lead to throw away after 20 cm of material is in a state without mixing.

countermeasures:

in the correct construction requirements.

mixing tube hole opening as required.

a mixing tube with a gap filling product.

problem four: produce flowing, formation thickness.

root cause analysis:

ceramic tile seam width in 2 - 3 mm belongs to the normal range of caulking, can directly use the product, if beyond the scope of the ceramic tile seam advice firstly and then take advice dozen white bottom, the white will not affect the color of caulking. Construction site temperature is too low, which leads to the cold, caulking products tend to be properly heating at this time, in the process of heating temperature is too high will cause gap filling agent in the rubber hose is loose, summer also is such. Coating surface uneven or object edges and corners, the line Angle grooves, easy to cause uneven coating, thickness is differ, thicker will flow. Construction material played too fast too thin when also can appear different degree of sag and sparkling.

countermeasures:

construction environment temperature and humidity is appropriate.

put product in a cool and dry place.

for caulking products proper heating, the temperature control in 50 & deg; The left and right sides.

These tile grout best grout sealer are meant to serve as a guide for business owners on how to both identify potential opportunities for transformative innovation and how to adapt to the constantly changing technologies of today.

What are you waiting for? Don't you want to provide perfect support to professional grout? If yes, so, switch to tile grout right away!

A technology team created for insuring that tile grout is produced with the finest materials and technologies.

Kastar Adhesive Co.,Ltd.'s core technology of tile grout enables us to understand and utilize in a right way.