Ceramic tile of construction joints type? What are those?

Ceramic tile of construction joints type? What are those?

ceramic tile seam construction process in the United States: after the first transverse vertical: clean ceramic tile aperture ( Wallpaper knife flat; The blade and ceramic tile edges parallel; The blade almost parallel with the ground) 。 About 0. 8 mm grooves; Grooves on both sides with ceramic tile edge; Ps: cross intersections must clean up; Clean the inside of the ceramic tile aperture dust: with a vacuum cleaner or broom sweeps clean. Must ensure that no damp inside ceramic tile aperture, no dust, particles.

to come up with corresponding color beauty of seam an agent: tear off the label on the bottom, on the seam an agent on the bottle and pull. Let us standing seam an agent on the ground, his left hand a beautiful seam an agent feeding mouth, tip down on the discharging mouth of the seam an agent, use a wet towel to cover in carrying material mouth on her left hand, right hand slapping a few mouth, make its top beauty seam an agent discharging mouth open. （ With a towel to cover the purpose is to prevent the seam an agent came out from the discharging mouth spray - - - - Tank pressure) ； Poke or directly with spikes of the seam an agent discharging mouth.

but pay attention to prevent the seam an agent injection on the wall, ceiling or on the body; The discharging mouth screws into the seam an agent on the discharging mouth; Load the glue guns; Prepare glue; Use a wet towel wet gap on both sides of the ceramic tile ceramic tile; But in the ceramic tile aperture must be clean, dry, You must be aware of the details) 。

play a ceramic tile seam an agent in the United States: for beginners can play 20 cm - first - - After 50 cm, skilled, can play longer length, then the glue guns flat; Under the discharging mouth with material board catch; The leveling seam an agent: ( The main use water scraper; Use a sponge; The fingers can also) 。 Ps: water scraper with grip; Four fingers, thumb under water scraper, scraper scrape excess material, water to the sponge. Until all the leveling horizontal seam an agent; The seam an agent about 20 minutes solidification surface; Feel the seam an agent after solidification, can do all the vertical lines;

half an hour: use a wet towel to clean ceramic tile aperture on both sides of the ceramic tile ceramic tile residue in the seam an agent; 24 hour; Normal use. The above is the seam an agent solidification in half an hour to wipe clean.