Ceramic tile seam an agent common problems and treatment methods

In order to avoid rework, we should pay more attention to detail, be careful. Now, to bring us beautiful ceramic tile seam an agent common problems and solutions, let you don't have to worry about will rework! With lighter than the original one, color white, white mist. Reasons: ( 1) Environmental humidity is too high. （ 2) The construction surface, containers, aperture, the seam an agent mixed with water. （ 3) Underlying caulking agent containing water is not clean. （ 4) Use the beauty of poor seam an agent, because transparency problems pale. Solving countermeasures: ( 1) Before construction should pass dry processing. （ 2) Don't construction when humidity is high. （ 3) On the surface to clean, do not touch water. （ 4) The underlying caulking agent or ceramic tile aperture water to dry. （ 5) Choose better quality seam an agent products. Second, due to poor adhesion, adhesive, produces peeling, flaking, the drum, such as peeling phenomenon. Reasons: ( 1) Caulking agent inferior, resulting in poor adhesion between the layers. Backing with caulking agent is too dry, even as the state of powder, still itself will have a very strong water imbibition, if meet the seam layer is thin, often seriously affects the seam an agent curing effect and caking property, so that the construction surface peeling, fall off. （ 2) Gap impurity, stained with oil, water or other contaminants. （ 3) Use inferior seam an agent ( 4) Construction temperature is too low. Solving countermeasures: ( 1) Choose better quality caulking agent render. （ 2) To make the oil base material surface treatment, water or other disposal and clean. （ 3) Choose better quality seam an agent products.