Ceramic tile seam an agent the correct using method

Do the beautiful ceramic tile seam though not high-tech projects, but there are a lot of skills, so how to correctly use the beauty of beautiful seam an agent? Together with the use of the small make up look at the beautiful ceramic tile seam an agent! Introduces how to use the sewing agent is as follows: need to prepare tools: art knife, clean cone, brushes, vacuum cleaners, Art paper) , artistic wax, glue guns, mixing tube, sponge, scraper, sewing, blades, etc. The next step is how to use its method is introduced: 1. Cleaning: brick joints with crack-cleaning cone or art knife clean dust in brick joints, reoccupy cleaner is sucked to dust in brick joints from garbage, reoccupy does cloth to wipe a brick joints, make brick seam dry clean. 2. Play beautiful seam an agent install the beauty of ceramic tile seam an agent to the hose, and then into the glue guns, oblique cut open, and then made about 30 ~ 40 cm glue, to reduce the uneven mixture on the seam an agent, and then use glue guns at the speed of uniform adhesive into the tile gap and make gum as evenly as possible and better. 3. Seam pressure: after the seam an agent with good, from one end of the cracks with caulking tools uniform to the other side, and properly handle the cross. 4. Rubber spatula: after seam pressure under normal temperature for about eight hours after the seam an agent table dry, can use the shovel knife on the surface of the ceramic tile, excess stock shovel. Is looks very simple? But actually doing the seam is very need patience and careful, the following need to pay attention to in the construction process and you talk about. 1. Empty drum place cannot use beautiful filled seam an agent, because the empty drum ceramic tile is stepped on deformation, long beautiful seam an agent will fall off. 2. Joint beautification agent before construction, need to prepare, clear aperture, can not have dust, water and other substances. 3. Walking on it, after the completion of the construction need at least 24 hours, if want to contact with water, need at least three days. The above is to use ceramic tile seam an agent. When using gap filling agent, need to learn more about related knowledge, reduce the problems.