Ceramic tile seam filling agent maintenance knowledge

Ceramic tile seam filling grout maintenance knowledge

why do, ceramic tile clean and maintenance

( A) In the process of using ceramic tile clean problem:

1, the surface stains: ordinary dust and tar adhesion in ceramic tile surface;

2, internal stains, dust, organic pigment with water or other organic solvent into the internal ceramic tile, the formation of difficult to remove the stains;

3, rust stains: iron rust rust stains left;

（ 2) The maintenance problems in the process of ceramic tile using

1, the ceramic tile surface is scratch: ceramic tile is in use process, under the influence of friction with hard objects, form all sorts of patterns, two-tone thus affect the burnish of ceramic tile and induct besmirch in decorative pattern, greatly affect ceramic tile is beautiful.

2, surface smooth, because of the glaze is relatively smooth, in under the action of water, small friction coefficient, causing surface smooth;

3, surface burn: ceramic tile surface is hydrofluoric acid burn out, the damage belongs to & other; Permanent & throughout; Fracture.

2, physical and chemical characteristics of ceramic tile

1, the physical characteristics: usually have smooth glaze layer on the surface of the ceramic tile and the naked eye under very smooth, in fact, there are a lot of naked eye cannot see the wool stoma, and dirt by internal stoma in ceramic tile, the formation of difficult to remove the stain. Glaze while the hardness is higher, but the friction in the long run, the surface is still grinding out pattern.

2, the main chemical composition: give priority to with silicate, under normal conditions, the regular detergents in ph will not damage to glaze, but hydrofluoric acid ( Is derived from the outer wall lavatory pure water, part of substandard, air-conditioning cleaning agents, and other special cleaner) Easy to burn out glaze layer on the surface of the ceramic tile.

3, the most ideal method of cleaning and maintenance

( A) Ceramic tile maintenance is through one of the most ideal method: add luster, to improve the surface hardness, friction coefficient, strengthening the stain out.

（ 2) The most ideal cleaning method is under the condition of without any detergent, can clean - - - - - With self-cleaning function.

4, traditional ceramic tile cleaning and maintenance methods of

1, the ceramic tile of traditional cleaners: neutral almighty wax water, alkaline water, acid cleaner, can to a certain extent, to clean the stain on the surface of the ceramic tile.

2, the traditional maintenance method: wax is the most commonly used. Wax resistance to tread mill and other physical damage on the surface of a ceramic tile have a certain degree of protection, but for the ceramic tile of the cleaning and anti-fouling has backfired. Wax adsorption capacity is much stronger than ceramic tile glaze for dust adsorption; Stain wax in the organic solvent penetration ability is very strong, often with the help of wax in the organic solvent into the internal ceramic tile, form is difficult to remove the dirt. On the other hand wax because it is a organic material and ceramic tile glaze inorganic bonding force is bad, not only easy to scratched, easy to fall off, affect beautiful. The skid resistance of ceramic tile also is decreased obviously.

5, the latest cleaning and maintenance methods of ceramic tile ceramic tile cleaning method

special stain removal organic pigments (such as rust, Such as tea, coffee, red crystal violet, etc. ) Such as cleaning need to select the corresponding clearing grout, rust remover, organic pigment targeted local clearing. The stain on the surface of a general or stain into the inside of the ceramic tile, we suggest use & other; Clean and bright & throughout; Or & other Ceramic tile clean powder grinding & throughout; To clean. Both cleaner has strong penetration and the fine decontamination ability, contain abrasive particles, the ceramic tile on the surface of the decorative pattern have certain repair effect. But in the use of & other; Clean and bright & throughout; , pay attention to not grinding for too long, otherwise the glaze become coarse lacklustre, besmirch penetrate more easily. “ Ceramic tile clean powder grinding & throughout; Contains a variety of surfactant and spherical grinding particles, not only has excellent decontamination effect, repair and whitening function more good decorative pattern, will not result in a glazed coarse lacklustre.

tile grout are among the best and the long known , which plays an essential part in automatic manufacturing.

Kastar Adhesive Co.,Ltd. is proud to be recognized as some of the most important and influential providers for global customers.Visit us at Kastar Grout.

Kastar Adhesive Co.,Ltd. is a team of manufacturers who have 10+ year experience on creating business plans and other types of productions with top-tier management firms and various multinational corporates.