Professional manufacturer of tile grout and adhesives with 27 years experience

Ceramic tile seam to do ( Ceramic tile seam beauty of the two methods of construction)

2020-12-04

Kastar

115

Now everyone on the usefulness and beauty of the house is very exquisite, after laying ceramic tile, the ceramic tile for the sewing processing, let whole decorate effect more perfect. Understand the beauty of ceramic tile seam together today, then, how to do,

the first seam construction method in the United States:

1, prior to construction the seam an agent, the first thing to to clean up the impurities such as dust, seam and the seam on both sides with crepe paper.

2, the beautiful seam an agent into the glue guns, then evenly into the slot, after good with wedge block material mouth first, then use the wiper will be leveling the seam an agent, if overflow the material on either side of the brick joints with a wet sponge to wipe it. Must be in the seam an agent before solidification wipe clean. If the seam in more than 3 mm wide, fill in the beauty of ceramic tile seam seam an agent are evenly, so also don't have to beautiful seam an agent, leveling automatic levelling line.

3, while the seam an agent without solidification, tear crepe paper.

the second seam construction method in the United States:

1, before using the seam an agent, it is necessary to check the construction site, make sure there's no empty drum ceramic tile or paste not firm.

2, after reoccupy dishcloth or the fine wool brush to clean up dust and other impurities seam.

3, the seam an agent discharging mouth landed, blade, with forceps clip is expected to head off, and then install discharging mouth, the discharging mouth with paper knife can cut into slope Angle of 45 degrees.

4, the beautiful seam an agent into the glue guns, slowly expiratory material evenly in the seam, the good coating should be as soon as possible after a uniform with scraper, leveling achieve smooth surface brightness is good, try not to make the seam an agent when scraping overflow external brick joints.

5, the slope Angle of the seam an agent in brick joints shall not be too thick or thin, as far as possible do not flash, especially for small ceramic tile, Mosaic, the seam an agent for the second time will meet cross intersection, must be a small amount of injection.

6, if there is any material overflow in the process of leveling, ignore first, but after all fill in every construction, 1 ~ 2 hours, should be erased by rag or gently with shovel knife scooping up spilled material.

the ceramic tile seam an agent, to us in the ceramic tile decoration, with very good help. In the operation of the seam an agent, you can also follow the operative methods described above. Believe that it can better and faster help to everybody, the ceramic tile of our home will be more beautiful.