Ceramic tile setting wall tiles before what need to be aware of?

A lot of friends there will be one step before the construction joints is indispensable engineering ceramic tile shop sticks. Below small make up detailed explain about the background wall of the shop is stuck, setting wall after buying ceramic tile, don't know how to shop is stuck.

setting wall ceramic tile is the most important is its adornment effect, so the shop sticks ceramic tile background wall, it is worth noting that the place is a lot. Before the shop is stuck note:

1, before the shop is stuck, have to find an empty place in accordance with the brick bottom number pieced together the pattern.

2, before and after unpacking the product should be kept upright, avoid is flat.

3, open the packing, in single chip removal make brick Angle from scratch when other tile pattern.

4, the single chip removal is to avoid the friction between the two piece of brick, although coated on the surface of protective film.

5, before the shop is stuck in accordance with the specific way of the shop is stuck, binder requirements inspection on the fastness of metope, didn't meet the need of intensity abort and reinforcement.

6, before installation shall not tear protective film.

7, in order to avoid surface scratch pattern, coating adhesive on the back of the product to make product positive in foam, soft materials such as paper or cloth above to operate.

8, the need when the shop is stuck down products need to use wood mat on the surface, not directly with the shop is stuck tools to knock brick surface.

9, when fill 鏠 don't too hard, so as not to scratch the product picture.

that is the small make up to ceramic tile seam an agent factory need to pay attention to matters in the process of setting wall brick introduction, information for a more beautiful seam an agent, can be found at wuhan seam an agent factory building materials co. , LTD's website for more consultation!