Ceramic tile will learn knowledge before the construction joints

Ceramic tile seam beauty just as its name implies is to beautify the gap, in the decoration is the floor tile, Mosaic, stone gap beautify processing, etc. Now people are more and more high to the requirement of the quality of life, the seam has become more and more will choose one of home decoration materials. But many people don't understand the seam, because the processing is not good, lead to all sorts of problems.

ceramic tile seam before construction will learn knowledge in the United States:

1. The sewing material choice

the seam material is ceramic filled seam an agent, true porcelain and ceramic mud, etc. Ceramic mud can lead to ceramic tile heat bilges cold shrink, easy to collapse, ceramic tile is not recommended. Ceramic filled seam an agent is soft, do metope can, but it is not recommended to do ground, hardness is not enough, not wear-resisting, time is long will easy to sag, and is not recommended. True porcelain glue, high hardness, wear resistance, product and toughness, not use ceramic tile to collapse, are best used in toilet and kitchen stain smeary more places, it is recommended to use. Sewing materials to choose the brand, such as ban on viewing is good.

2. The order of the construction joints

ceramic caulking agent construction generally before into furniture, so don't have to move the furniture back and forth, also won't because of construction ceramic filled seam an agent to bring destruction, ceramic caulking agent construction requirements is higher, when construction ceramic tile aperture cannot have impurities such as dust, water, oil, this will affect the use of ceramic filled seam an agent.

3. The seam gap width and depth of

best construction gap is 2 - wide 1-3 mm, deeply 1. 5mm。 1 mm can also, but this kind of small crack seam do the effect is not obvious, if the gap is relatively shallow, there will be easy to fall off.

4. Stick after ceramic tile how long do the seam

shop sticks ceramic tile to wait until after the cement in the ceramic tile below the mixture thoroughly dry solid, and then carefully put in brick joints from dust and dirt, and maintain a clean and tidy in brick joints from being dry, and then to the seam. In general, under the condition of the normal weather, a week is advisable.