CGM pulp and high-strength non-shrink grout material difference

CGM seat pulp CGM bridge pulp price CGM pulp factory, CGM bridge slurry characteristics CGM slurry is a kind of cement as cementing material, with the complex and beautiful seam an agent and high-strength aggregate, the scene can be used after adding water mixing, no shortening, high strength, easy construction and so on characteristics of special size, suitable for all kinds of pulp equipment plate. Second, CGM seat size for size 1. CGM a paste is first applied to the equipment installation engineering of slurry and concrete cushion construction. Technical performance 2. Refractory castable manufacturer of CGM pulp strength and expansion ratio and other technical indicators are as follows: test three, CGM pulp using method 1. To cut hair root appearance, concave and convex appearance difference should be controlled in more than 50 px. Appearance should be clean, there should be no oil and floating ash and loose concrete, sprinkling water slurry 1 hour before should be wet root appearance, slurry water should be cleared at the beginning of appearance. According to the plate size and slurry height trapezoidal die body. 2. When slurry mixing according to the manufacturer to provide the amount of water scale using artificial or mechanical mixing, must be uniform. 3. When mixing good pulp can knead dough shape can be used, will good mixing slurry injection to die in place of the body, should be layered tamping, casting thickness of each layer should be controlled at about 50 mm, slurry surface shape should be around the middle high low arc, laying the plate to remove air. 4. When the paste appearance which disappear after ( On the basis of the construction environment temperature and decide) For plate and the determination of elevation, hand pressure plate placed a slurry application, with wooden hammer knock plate appearance, make it smooth down, knock when may not be inclined. Plate falling to a certain level to stop the tap, check again pad elevation. 5. Cover up the article such as straw bag sprinkler maintenance, avoid collision and vibration during maintenance.