loading

Professional manufacturer of tile grout and adhesives with 27 years experience

Compared with traditional on-site mixing mortar, dry mortar of the six major advantage - Ceramic tile adhesive | | | waterproof coating straight with mortar jointing agent

we cut to the chase, mortar is what? With inorganic gelling material and fine aggregate, and a proportional mixing water, also known as the mortar. Used for masonry and plastering engineering, can be divided into masonry mortar and plaster mortar, the former used in brick, stone, brick masonry and component installation; The latter can be used for wall, floor, roof and beam structure on the surface of the plaster, to meet the requirements of protection and decoration, etc. Ordinary mortar materials also have a plenty of plaster, lime putty or clay mixed with fiber reinforced material and water mixture waxy, called grey, paste, clay or cement. Commonly used with hemp fiber ash ( Incorporation of hemp fiber lime paste) , paper reinforcement ash ( Mixed with lime paste paper reinforcement) , plaster ash ( In the plaster mixed with lime putty and paper tendons or glass fiber, etc. ) And mixed mortar ( With a small amount of lime in clay and straw or straw) 。 Compared with the advantages of ordinary mortar dry mortar in where? ) Excellent quality: dry mortar by professional manufacturer in accordance with the scientific formula, through accurate measurement, large-scale automatic production, high mixing uniformity, raw materials, strict screening, monitoring, quality is reliable and stable, completely solve the scene the common fault of the 'measurement weighing difficult', so whether masonry mortar or paint, the ground mortar, the early and late strength is far greater than the scene from mixing mortar strength, or even several times higher, the surplus greatly improve the safety degree, and overcome the overall strength when the mixed mortar discreteness big problem, to ensure the improvement of the whole engineering quality. ) Variety: goods mortar production formula can be made of specialized technical personnel in the laboratory experiment, by adjusting the formula of trace amounts of additives, can greatly change the performance of the goods mortar, and can derive many kinds goods mortar, architectural development of high quality to meet the demand of new building materials. ) Construction performance is good: because of the mortar admixed the scene of the past cannot use water thickening material, such as mortar thickening powder, cancelled the gas hard materials such as lime putty, makes the consistency of mortar is stable, narrow, bonding degree increase, is helpful to strength development. Both in masonry and plastering construction operation process, on-site construction personnel are unanimously reflect the convenience of use, easy operation, save time. ) Easy to use, civilization construction: past the scene from mixing mortar, at least to consider - general storage of yellow sand The dosage of the day, about more than m. The mortar is along with it into the goods, finished in the day, so only the original sand yard / - / area ( Have considered all kinds of warehouse stacked) 。 At the same time, dry mortar is packaged or canned, wet mixing mortar is wet, the storehouse, pool, piled than SanDui yellow sand clean, tidy, easier to civilization construction management; Avoid accumulation of various kinds of raw materials to the construction site and reduce the impact on the surrounding environment, especially in large and medium-sized cities building renovation project, can solve many problems caused by traffic congestion, narrow. ) Greatly reduces the project construction dust pollution and noise, the green environmental protection: in the process of engineering construction in cities, the three major dust pollution mainly based earthwork digging luck; (2) on-site concrete, mortar mixing; (3) sand and gravel, cement transfer, etc. Now, residue management is gradually strengthening, is basically realized commercialization concentration mixing concrete, if the nanjing can fully implementing goods mortar, so basic can reduce construction site % of dry sand, cement dosage of the above. Not only the site selection of yellow sand dust, cement transport, unpacking, stirring the dust float in the sky also greatly reduced, and even a lot of sand and gravel, cement vehicle drip dry on the urban road transportation, can effectively control dust pollution. This will greatly improve the urban road environment and air quality, the spirit of the city will not increase pollution by municipal reform a new round of development. In addition, the mortar mixer open-air homework while, also can be completely destroyed. Especially in the past some of the old mortar machine when working overtime at night 'ji ji' sound is often caused by the noise of the dispute with the surrounding residents, is always difficult to coordinate and solve. Some products can be recycled, the fly ash and other industrial waste pollution to the environment, reduce waste and reduce the production cost; In application of high and new technologies such as nanotechnology also has a very unique place, such as in the external walls with adding different nanomaterials, dry mortar can make external has the function of purifying waste gas in the air, the function of the automatic adjustment of indoor air humidity, temperature; Some products of heat insulation technology can make the building energy efficiency reaches more than %. ) Efficiency: save material storage cost, no waste ( On-site mixing about ~ % of the material loss) ; Suitable for mechanized construction, shorten the construction period, reduce the cost of construction; Suitable for thin layer construction, increase the construction practical space; Solve the inherent defects of traditional mortar, so can guarantee and improve the quality of construction, engineering quality improved obviously, a lot of late save maintenance cost. Germany's ( The high) The famous brand, dry mortar in Germany, Australia, Finland, the United States and other developed countries have dry mortar production bases, sales network all over the world. Brand was established in year, services in China, now has a strong r&d team, advanced production technology, modern production equipment and perfect sales network. Main production sales: ceramic tile adhesive, jointing agent, waterproof coating, straight with mortar, stone glue, glass mackerel and other kinds of special dry mortar fillet. Ordering merchants hotline: -

GET IN TOUCH WITH Us
recommended articles
Knowledge APPLICATION NEWS
Sealant Composition and Function

Sealants are commonly used in construction and home improvement projects to fill gaps and cracks, providing a watertight and airtight seal.
Every successful project needs purpose-built solutions to ensure efficiency, effectiveness, and overall success.
Contact Adhesive Safety Guidelines: What to Follow

Contact adhesive is a versatile and widely used adhesive that is commonly used for bonding materials such as wood, metal, and plastic.




What is Contact Adhesive?

Contact adhesive is a type of adhesive that is widely used for flexible bonding applications.
In today's highly competitive market, businesses are constantly looking for ways to bring innovative products to market faster and more efficiently.
no data

Contact Us

Whatsapp : +86 13924533378
Wechat : +86 13924533378
Tel : +86 731 89870169
E-mail : sales@kastarsealant.com
Address: No.1, ShunJing Road, Songxia Industrial Park, SongGang Town, Foshan, China

Better Touch Better Business

Contact Sales at Kastar.

Call Us

+86 13924533378

Copyright © 2025 Kastar adhesive Co.,Ltd. | Sitemap
Customer service
detect