Concrete interface beautiful seam an agent construction method

The concrete interface beautiful seam an agent interface beautiful seam an agent role interface beautiful seam an agent one-component interface beautiful seam an agent, a two-component interface seam an agent construction method like that! 1, the construction environment should be dry, 70% relative humidity should be small, well ventilated. Base level and environmental temperature should not be lower than + 5 ℃. 2, base preparation: the base surface should be clean, no loose, no dust, grease, moss, carpet glue etc should be removed, loose and cracking site should be cut in advance, in addition to good and repair. 3, mixing, stirring, must use the electric equipment to form a homogeneous slurry. 4, coating and drying: use roller coating to the base surface sizing agent, or brush to brush can't leak, and let the dry coating ( About 12 hours) 。 5, curing and finished product protection, must strengthen the ventilation, natural curing, to paste action ( Surface film) And confirm the completely closed after the base level, can carry out the follow-up process. 6, tools, cleaning solidification slurry is very difficult to remove. Tools after use, should be cleaned with water as soon as possible.