Construction - CGM pedestal grouting reinforcement material construction points Bearing grouting material

Bearing grouting reinforcement bearing reinforcement grouting material manufacturer support grouting material price support reinforcement grouting material construction advertent items have the following: the & # 8195;   1, base treatment, remove dust, grease and other dirt against adhesive material; To repair the cracks and other defects; Base humid hefei grouting material manufacturer to saturated with water, but dont leave MingShui when construction.     2, according to the construction area or unit moment area accounting powder feed rate of xi 'an grouting material manufacturers and water, mixing amount shall ensure that every time in mortar lose all finished before flowing property.     3, mixing: first to participate in the water in the mixing barrel, and then gradually to weigh a good grouting material, while feeding electric high strength cement grouting material mixing gun for mixing, until finish powder all add, continuous mixing 3 - again 5 minutes, make the paste evenly.     4, after mixing slurry evenly to deal with a good base, self-leveling. Flow flat should be finished within the construction time, construction machines and after wash clean with water immediately.     5, can the construction time depending on the ambient temperature, mixing at 20 ℃ at the end of 30 minutes. Note: after healing liquid slurry of avoid by all means not to add water mixture mixing it with again.     6, the dosage of materials - 2100 2300kg／m3。