Construction tip | why seam pressure then bubbles?

1 seam after the ball pressure foaming, have a plenty of section by section, is this why? This kind of situation in the narrow gap width, the easy to appear. Reason is that when a material, mixing nozzle export cut, material to cover the gap not only to play in. When seam pressure, only a small amount of material overwhelm crack, a crack in the sealed in air is compressed, the pressure, when pressure to a certain degree, the air will be at the top of the material's thinnest place. Solution: one, when he saw the sparkling, timely with Yin scraper Pierce, catch up on the seam an agent. Second, make way, don't cut the mouth, vertical play as far as possible, make the material as much as possible into crevices. 2 ceramic tile is easily collapsed? Ceramic tile is mainly divided into two categories, currently on the market as a whole porcelain, a quality of a material is hard and not easy to damage, normal cleaning. The other is a ceramics, only a thin layer at the surface of the porcelain, rub a little a large ceramic tile is easy to crack. Clear this kind of ceramic tile aperture, 淸 sewing tools horizontal pushing to parallel with ceramic tile aperture, avoid horizontal pushing 淸 seam tool Angle in the process of change, shoulds not be too hard. And communicate with the landlord before construction, avoid later collapsed causing unnecessary trouble. Above is today bring you share, the tips, you get here? This article copyright WWW. zhuogao。 All net, do not reprint copy and paste! Offenders will investigate