Daily maintenance tips, ceramic tile seam beauty make your home more beautiful

Many families in decorating, will use the brick floor tile. But there will be a problem when I ceramic tile shop is stuck, there will be a certain gap between is ceramic tile. So beauty created a seam, the seam after the household not only increased the overall level of appearance, but also avoid the shelter evil people and practices of ceramic tile aperture, very practical. That the seam after the ceramic tile of how to maintenance, what are the tips?

in fact, the beauty of curing does not begin from after the construction completion, the seam of maintenance from before construction began. The sewing effect is good, and construction environment, the late dry environment has great influence. Of formal beauty in front of the construction team will make sure the owner of the specific conditions of the ceramic tile shop is stuck in the home, the crack-cleaning also want from a crack in the multiple check the drying condition of ceramic tile aperture, then in the construction.

in the construction has been completed, to make the seam in a constant temperature and humidity airtight dry environment. In simple terms, is roughly dry 24 hours behind closed doors and Windows environment. In case of wet weather, dry concrete time to extend.

in the seam, it is best to use a deep 'V' shape, it can keep the seam of time longer. 'V' shape not only ensure the beauty of beautiful sex, can make the seam slightly below the surface, to prevent the daily cleaning of wear and tear.

deep V, is not to say that the deeper, the better. General arc concave tiles under 0. The radian of less than 2 mm, it is normal. If the concave arc reaches 0. 3 mm, the seam is likely to dent, there would be no fight corrupt mouldproof function. Causes of depression are many, so need to pay attention to when cleaning, if produced this kind of situation, the beauty of ceramic tile aperture slit in time.

for the seams of the late cleaning maintenance, although the seam usually have waterproof effect, but also is unfavorable to the seam long soak in the water. Toilet is the area of water more, if did the seam in the toilet, after a bath must be clear in time the ground water, open a window ventilated take a breath in time to remove the water mist on metope.

if the seam surface with oil stains, first with the oil can wipe with wet cloth, paper towels and so on, is a can wipe clean. Oil on the presence of a certain time, can use neutral detergent wipe gently to remove. Remember that can't use steel wire ball, or acid alkali cleaner to wipe, it will make the seam surface wear, affect the color and luster of the beautiful stitch.