Diy beautiful seam, read this article to let you spend less money

Bring professional beauty directly seam construction process, make to begin directly the owner of the seam, can quickly learn to do the seam, experience the beauty of early joint bring visual enjoyment.

1. Qing

to diy the joint owner, remember this step 9 construction process, let you spend less money will be at a constant speed with crack-cleaning shovel knife ceramic tile aperture and seam wall was from the inside out a clear, with the blade tilted 45 & deg; Angle along the seam before pushing, backhand & 45 deg. Before driving, seam repeatedly remove dust and debris.

2.

prepare diy beauty absorption joint owner, remember this step 9 construction process, let you spend less money, please the artifact & other; The vacuum cleaner & throughout; With high power & lt; More than 1500 watts & gt; Hoover the metope and ground ceramic tile aperture from top to bottom, from inside to outside adsorption again carefully, clean up the clutter in the ceramic tile aperture.

3. Wipe

to diy the joint owner, remember this step 9 construction process, let you pay less necessary clean up after ceramic tile aperture, repeatedly with half wet towel to wipe aperture, again make sure ceramic tile seam wall without the black border, enhance the aesthetic.

4.

prepare diy beautiful seam owner, remember this step 9 construction process, let you spend less money on glue ( The seam an agent) , selected the seam area and colloid color ceramic tile, glue gun mount the seam an agent, on the top bar of the hose and fixed position, does screw glue plug, open bottle, slowly push glue, until both colors appear in the gate and install tighten mixing tube. Also according to the size of the ceramic tile seam cut right out of the plastic pipe diameter, pipe end 45 & deg; Angle, use glue gun will play full ceramic tile aperture, colloid uniform glue process do not pause.

5. Press

to diy the joint owner, remember this step 9 construction process, let you spend less money according to the size of ceramic tile aperture to choose the appropriate tools ( Doctor blade, tungsten steel round bar, steel ball, etc. ) Seam, starting from the Angle of the external pressure, light cross interface crack, will press good interface translation, the requirement is fluent, no obvious node, the origin at the center of the cross interface against external pressure glue, smooth.

6. Beauty care

prepare diy sewing owner, remember this step 9 construction process, let you spend less money within 12 hours after the seam construction to ensure that the scene no one into the ground, close the doors and Windows, after being ground completely curing, can enter, if necessary can upset the cracks in the ceramic tile protected crepe paper, prevent other subsequent seam construction process of the damage.

7. Except the

to diy the joint owner, remember this step 9 construction process, let you spend less money according to the field of ceramic tile glaze is different, choose a different tool to clean up after curing more than expected, the new wallpaper knife, shovel knife, remove excess material.

8. Sweep

to diy the joint owner, remember this step 9 construction process, the whole construction of ceramic tile lets you spend less money on the surface of shoveling the remaining material clean, with a dry towel again from the inside out again, waste water must be of the pour into the specified water pipe, homeowners to prevent pollution wash dish pool kitchen and toilet.

9. Check

to diy the joint owner, remember this step 9 construction process, let you spend less money the seam and the owner need to carefully check the rectification after the completion of the joint aperture, for acceptance.