Do you know the construction steps and 8 precautions for the beautiful seam of antique bricks? -Beautiful seam agent factory

In recent years, more and more people in the market have begun to pay attention to and choose the decoration and effects brought by antique tiles. The antique tiles attract people's attention through the unique classic charm, creating a very nostalgic feeling. The foot feel of antique bricks is generally very comfortable and delicate, and it gives people a sense of peace and relaxation when stepping on it. In terms of design style, the classical freshness and elegance and the modern bright and cheerful are both brought into full play. So what is antique brick? What are the steps for beautiful stitching of antique tiles? What are the precautions? The editor will share with the author in detail! 1. What is antique brick? Antique tiles usually refer to glazed decorative tiles. The embryo body can be porcelain, which is the mainstream; there are also stoneware, fine stoneware and stoneware; the glaze is mainly matte; the color is yellow, coffee, dark Mainly red, earthy, gray, gray and black, etc.; evolved from colorful glazed tiles, in fact, antique tiles are glazed porcelain tiles. It has the characteristics of high strength, high wear resistance, non-slip and corrosion resistance. Second, the construction steps of beautiful joints of antique bricks, and treatment of brick joints: joints can be filled or not filled. If the joints need to be filled, the jointing materials can be completely dried before the beautifying agent construction can be carried out. The depth of the joints should be at least about mm; and cleaning treatment : Before using the beauty grout, vacuum the dust in the cracks of the tiles, wipe the sides of the tile joints with a towel to remove dust, oil stains and other contaminants, and use a cleaning spatula to remove contaminants on the surface of the tiles. , Applying textured paper: When applying textured paper, the surface and gaps of the tiles should be kept clean and dry. Textured paper should be pasted on both sides of the gap. In order to ensure the effect of the cross, the horizontal and vertical line construction is recommended to be carried out in hours. The two sides of the textured paper should be cut neatly without burrs, and the width should not be less than cm. The adhesive force should be good, but the glue should not remain. (Because the surface of the antique tiles is not flat, you must paste masking paper, so that there will be no remaining material left on the tiles for cleaning.), gun and seam: choose the real porcelain glue of the desired color, and install the special mixing tube, Put on a special high-quality labor-saving glue gun, squeeze and remove the real porcelain glue at the front end, so that the real porcelain glue can be fully mixed evenly. When sewing, the mixing tube should be as vertical as possible to the tile surface so that the real porcelain glue can fill the gaps, and move forward evenly. Master the strength and frequency so that the real porcelain glue flows out evenly. Suitable temperature-degrees. 、Pressing seam and scratching seam: If you want the real porcelain glue to have a moderate arc surface for each can after curing, you can use a special pressure seam steel ball to forcefully pull from one end to the other end along the brick seam, and keep the force uniform; if you want to After curing, the performance of the real porcelain glue is as level as possible with the tile surface. You can use a beautiful seam scraper or a soft rubber sheet to pull from one end to the other end along the brick seam to keep the force uniform and not deviate from the textured paper to prevent Contaminate the tile surface. , Cleaning and finishing: Let stand for one minute, tear off the textured paper, remove the surrounding real porcelain glue beauty joint agent, and wipe off the remaining stains. 3. Matters needing attention ⊙ Ensure that the construction material must be flat, strong and free of dust. ⊙ The width of the tile joints should be the same. ⊙ The mouth of the discharging nozzle should be small and the discharging should be even. ⊙ After each scraping, a small amount of self-overflow in the discharge nozzle can be wiped off with newspaper when re-stitching. ⊙ When building small bricks with many cross joints, the material should be discharged as little as possible, and the material should not leak out. When the horizontal joint is filled, the cross joint should be scraped lightly to prevent the material from flowing down during the scraping process. ⊙ After construction, be sure to wait until the surface of the beauty joint agent is slightly dry before removing the spilled material. ⊙ If you use the sponge method, wipe along both sides of the gap. If there is too much material left at the beginning, you can use a scraper to wipe a part of it and then use the sponge. ⊙ One hour after the ground construction, do not walk on the material before the material is dry, so as not to dirty the ground and pollute the surface of the beauty joint agent.

Precautions for beautiful seam construction steps Antique tiles