Don't let the 'bricks' be empty! Professional solutions for tile construction and tile adhesive-Mei Gap Factory

Nowadays, ceramic tiles are basically laid in home decoration, but after a period of use, various phenomena will appear: falling off and hollowing. All this is because the preparation work before laying the tiles is not done well, so when the family is preparing to lay the tiles, the preliminary work must be done in place, but it is a very troublesome thing to repair it later. Below, the editor will talk about the selection of tiles, the plane of the wall, the mixing of cement mortar, and the overall construction, the points that are ignored by people when laying tiles. When choosing ceramic tiles, you must choose qualified ceramic tiles, focusing on the related inspection reports of the ceramic tiles, and the water absorption rate of the ceramic tiles, which should not exceed %. Excessive water absorption of tiles may cause excessive water absorption, thermal expansion and contraction, and cracks. Too low water absorption will cause the tiles to fail to absorb the water in the mortar, and the poor adhesion between the mortar and the tiles will cause the tiles to fall off in the later stage. . Solution: Don't be greedy for small bargains and buy low-quality tiles. The graphic developer of the wall usually smears a putty layer on the wall to pass the acceptance before handing over the house. Therefore, this layer must be shoveled off before the decoration construction. The wall has to be roughened, and the wall is miscellaneous. The objects should also be cleaned up to prevent the moisture in the mortar from being absorbed by the dirt on the wall. The wall is too dry before laying the tiles, and there is not enough moisture, which will cause the tiles to not be fully bonded. Solution: wet with water before paving and control the humidity at %-%. If the cement mortar is mixed with cement mortar, if the mark is too high or too low, it will directly affect the coagulation effect with the tiles. The mark of cement mortar refers to the viscosity of cement. If the mark is too low, the viscosity is poor, and if the mark is too high, the viscosity is stronger. The ratio of cement to sand in the cement mortar is also very important. Too much cement may cause cracks in tiles, and too much sand may cause shedding, which is also related to the construction technology and experience of the bricklayer. Solution: master the appropriate ratio, ask experienced masters, try to achieve the appropriate ratio, in order to ensure that the ceramic tile fits more firmly. In order to save construction cost and time, some bricklayers just apply mortar around the tiles. Regardless of whether the mortar on the back of the tiles is evenly applied, the work is completed in a hurry. This will cause various problems with the tiles in the later stage. Note: It is not advisable to use too much mortar, it is easy to overflow from the bottom after knocking. 、The tiles are not seamlessly connected. Don’t forget that there is thermal expansion and contraction. A gap of at least -mm should be reserved between the tiles to prevent them from squeezing each other due to thermal expansion and contraction. , Find a serious and responsible construction master, and supervise the work by yourself. Whether in the long-term or in the short-term, it is necessary to treat the gaps of tiles with beautiful seams. A good seam will make the indoor environment more comfortable. To make beautiful seams, choose the beautiful seam agent factory, the professional and conscientious brand, you are trustworthy. We have finished the preliminary work of laying ceramic tiles, and I believe that it has also solved the troubles of many owners, and no longer worry about the problems of tile falling off, but, do you know? With the gradual rise of building materials, a new type of building materials: tile adhesive, has basically entered every household. Although traditional building materials can make ceramic tiles stick firmly to the wall, no one can guarantee how long this 'shelf life' will last. Therefore, many families want to make ceramic tiles stronger and stick to the wall for a longer period of time. Use tile adhesive to paste. However, due to improper construction or interference from external factors, the tiles will still fall off even after the tile adhesive is processed. So what is the reason? Let's take a look together. In addition to the above-mentioned preparatory work for laying tiles, there may be the following reasons: 1. The construction is not in accordance with the product specification; 2. It is diluted with water or mixed with other solvents; 3. After the construction is completed, no protection is done. Measures to make the tiles subject to collision, squeeze, pollution, water spray, etc.; Fourth, the construction environment temperature is too high; last point, the use of untested inferior products will also affect the bonding effect of the tile glue! Can tile adhesive be mixed with tile adhesive? At present, the combination of tile adhesive and tile adhesive is a more rational choice! As an interface material, ceramic tile adhesive is used between rigid ceramic tiles and tile adhesive. The extremely high bonding force and sufficient flexibility can greatly improve the safety and reliability of tile paving. When laying ordinary or small-sized tiles, tile glue alone can also achieve a firm bond. But it is difficult to solve the problem of bonding between large ceramic tiles and the bonding layer interface. Then, the combination of tile glue and adhesive can make the big brick 'unbreakable'! The strong ceramic tile adhesive of Meijiao factory, (special for large slabs with great value), a trusted professional brand, uses the principle of chemical bonding, and is a ceramic tile adhesive optimized by polymer modification. The products are strictly in accordance with the ceramic tile adhesive (JC/ T-) The new version of the industry standard is implemented, safe and environmentally friendly, non-toxic and harmless. Professionally designed for large slab tiles, effectively improving the effect of tile paving with low water absorption, reducing the phenomenon of hollowing and falling tiles. Beautiful seam agent factory, your trusted professional brand.
Tile Adhesive Tile Construction