Epoxy color sand caulking agent construction, how to notice

Epoxy sand color is filled seam an agent made of pure waterborne two-component epoxy material and fine material refined but become, now let's simple introduce epoxy color sand caulking agent construction.

sand epoxy color caulking agent construction procedure

1, mix mix A and B component;

2, along the diagonal direction to daub, will all seam filling and compaction;

3, rough surface with wipe cloth 360 degrees looped wipe;

4, delicate face with wipe cloth 360 degrees looped wipe;

5, 72 hours after caulking agent completely dry rear feasible;

sand epoxy color caulking agent construction points for attention in

1, the construction to check before is stickup and firm, will clean up and crack on the surface of the ceramic tile, best and brick joints of ceramic tile surface wetting, but don't leave water.

2, caulking agent after mixing consistency to erect in micro flow down on the spatula is advisable.

3, construction process, best once every 15 minutes stirring, to avoid the caulking agent hardening, once filled seam an agent hardening continue to use is forbidden.

4, mixing must fully, and the biggest strength to ensure uniform color. King has seam mix of porcelain, forbidden to add porcelain king of other components.

5, veneer surface residual caulking agent to clear in time, to remain on the surface of ceramic tile has been solidified and difficult to clean up the gap filling agent, can't use acid etc excitant chemicals to clean, can use wet dishcloth erased hard

6, it is forbidden to add mix cement, dyes and other building materials products.

recommended articles:

with epoxy sand texture beauty, what is the biggest bright spot?

how beautiful seam an agent construction, ceramic tile seam beauty construction step,

when to use the seam an agent how construction good

the seam tutorial, very detailed the seam construction step tutorial