Epoxy color sand construction tutorial ( Incredibly and seam an agent! ）

Many people have heard of the seam, but there are many kinds of products, do not know the seam also beautiful seam an agent, and the upgrade product of epoxy sand color is filled seam an agent, and it is two kinds of different products. As the same as the material, many owners think that the bottles in the seam an agent using epoxy color sand is poured out, construction procedure is the same, the fact is it true? We take a look at the construction of epoxy color sand tutorial.

the epoxy color sand seam an agent is?

first of all we want to be clear, beautiful seam an agent is not epoxy color sand, although the two main materials used in the same, but there is a certain gap. Toner is exquisite, beautiful seam an agent paint but epoxy color sand by adding natural sand particles, proportion of curing two product is very different. Bottled out beautiful seam an agent can use, but not epoxy color sand.

the construction procedure of epoxy color sand:

1. Clear aperture

will clean up ceramic tile aperture, with the depth of about 3 mm, keep dry and crack no water damage;

​2. Mixing the color sand is

sand materials needed in proportion to stir in the container, suggest a stirring a group, to avoid the color sand useless after curing, color sand mixing evenly, no agglomerate, liquid level, stirring during cannot add water;

​3. Fill in the gaps of

scrape board take a small amount of color sand, fill in the gaps, bit by bit can be iron at the same time, cut off the redundant color sand, can be repeated use of cracks in the other, as long as no cure, can not restricted;

​4. Iron

iron excess sand texture of ceramic tile surface can scrape, also can be colored sand compaction in the gap, then scrub ceramic tile process can save a lot of strength, colour sand also can contact with the aperture fully;

​5. Scrub ceramic tile

epoxy color sand belongs to water, can wash clean before curing, after the end of the iron can be scrubbed; Scrub is divided into several steps, cleaning agent can be added in clean water, use a sponge swab wet ground, scrub ceramic tile in the form of a circle, avoid color out of the gap in the sand; Scrubbing process is much more change water wash sponge, know to wipe out of the water is clean on the surface of the ceramic tile. Epoxy color sand construction is more than five steps, looked at a little complicated, but it's much more convenient than the seam an agent construction and have you learned?