Epoxy color sand construction

Epoxy color sand construction

1, construction preparation,

ready for disposable gloves, pen knife, brush, and the shovels, and the cloth, scraper, multi-functional electronic scale, stirring barrels.

2, clear aperture

with dishcloth, pen knife, brush tools such as cleaning the residues of aperture, because in the process of shop sticks ceramic tile there will be some residue needs for processing. Clean ceramic tile can effectively extend the service life of products.

3, epoxy seam an agent debug

it's a two-component epoxy beautiful seam an agent to be mixed stirring after construction, mixed ratio of 10:1.

first put the stirring barrels on the electronic scale and then say reset

will have prepared powder into the bucket down the current weight

according to the actual amount to allocate, such as the current weight: 380 g

then electronic scale to zero, our ratio is 10:1, so we add 38 g of curing agent.

then you can begin to stir, in the process of mixing, do not add any additives.

don't need to fully stir well to avoid products curing

4, formal construction

with special beauty first seam caulking scraping the surface ceramic tile, scraper & 45 deg. Angle, the epoxy evenly the seam an agent to fill in the gaps.

construction not in right way when the construction, avoid the completed sewing the material out.

construction process we can use a common auxiliary scraper.

5, cleaning residue

preparing a big pot of water, should first microfiber cloth to clean the surface residue.

in the same way that a circle, while cleaning, cleaning, until the surface has no obvious residue.

water is dirty need change water immediately. Reoccupy sponge of oblique clean surface. Never wipe with right Angle when cleaning