Epoxy color sand remedy ( Failure to remedy in two different conditions back! ）

The seam do failure is very common things, even if is a professional beauty seam masters have error of time. Actually the seam do fail is not a big thing, timely repair, professional chefs to respond to these or have a certain way. If you do the seam with epoxy color sand failed, how should remedy?

with epoxy sand texture beauty how remedial failure

a, epoxy color sand has solidified

if the color sand has been solidified, is can't to weed it out directly, because the adhesion of epoxy sand texture beauty seam an agent is very strong, and hardness also is much better than the general beauty of bottled seam an agent, and anti-scrape wear-resisting, use brute force cannot be to weed it out. Need to use industrial heat gun, heat the sand texture, make its softening, reoccupy a crack in the cone will colour sand shovel out the wind. Gap is clean, before the color sand must not have residual, again for construction to complete the remediation.

2, not curing epoxy color sand

sand texture beauty very thick seam an agent, not curing, a crack in the usable wind cone will pick out the color sand, because the color sand belongs to water-based products, accidentally get the color sand may be cleaned, crack in the residual also can use wet towel to wipe clean. But at the time of the next construction, must maintain gap clean dry, so the color sand construction will not appear again when the problem. In order to avoid the seam do fail, when construction must pay attention to the steps don't make a mistake, must first check it again after doing perfect seam, found mistakes before sand texture curing remedy as far as possible. If only because of the color of the color sand don't like it, you can try to fill on a layer, avoid shovel out do the color sand construction remedy trouble again.