Epoxy color sand seam teaching video ( Steps! ）

With epoxy sand texture beauty teaching steps

1. Crack-cleaning, maintain a dry environment

with epoxy color sand construction also need to clear, the gap of lime, sort out the stain, the depth of the guarantee, generally in more than 3 mm, but also to ensure that gap no MingShui drying. At the same time of construction, dry environment is also very important, if encounter rainy weather, can be another day.

2. Ready to materials, tools,

the color sand construction tool is very simple, need only scraper, sponge, cloth, gloves. But the color sand need to mix, so prepare to mix material container and a small bucket.

3. Material mixing

the color sand, divided into two material is a pack of curing agent, is a pack of pigment, the color sand according to the need of dosage, stirring evenly in the container. Suggest stir for about 5 minutes, until the color sand not agglomerate, particles, do not need to add water, during MingShui on and avoid.

4. Daub sand texture

mix sand texture is thick, with scraper on ceramic tile, if can evenly inside the gap would be even better. If you feel no fill the gap, can apply for the second time.

5. Iron

gap filling sand texture, need blowing hard with scraper gap, let the color sand pressure gap of really, as well as the surface colour sand scrape off the excess, avoid waste.

6. Clean ceramic tile

the color sand blowing aperture can directly cleaning after the ceramic tile, clean can be divided into three times. For the first time will be about 8 into a wet sponge, wipe away the tile surface in the form of swirling redundant color sand. Second sponge to clean clean, drain the water, brush sideways to crack. Third, with a strong suction force erase the dishcloth excess of ceramic tile surface stains, it is good to wait for curing.