Epoxy color sand when is a good time to do?

The seam construction is something more serious, the construction time, the environment has certain requirements. Seam, of course, beauty is not only filled seam an agent and the seam an agent, and a combination of epoxy color sand. Colour sand construction is very simple, many owners will buy materials back to their construction, but the color sand, when is the best time to do?

1. After ceramic tile to stick and dry

the color sand and seam an agent, must be in good ceramic tile to stick and dry before construction. Because of the waterborne epoxy colour sand are mostly available in the market, and water-based beauty seam an agent is a feature. Construction environment must keep clean and dry, because epoxy color sand in the water will be break down, can't cure. Ceramic tile to stick a good dry after appearing, gap is very clean, dry and surrounding environment, the most suitable for the seam.

2. Furniture before moving into

when the seam to keep the floor clean and tidy, if it is a new house, need to do before move in furniture colour sand seam. Colour sand need directly on the ceramic tile construction, takes up a very large area, after use with a wet sponge to clean the ground. Must ensure that the construction of the ground enough empty, if touch on furniture, clean will increase the amount of work, so it's best to move in furniture before construction. If the house has been living, furniture can be moved from construction again.

3. Decorate a wall after

clean from top to bottom, because the dust falls to the ground can clean together. Decorate, too, to wall to decorate good then do the seam, it can avoid the construction, dust, garbage into crevices in the wall and affect the curing of colored sand, also can avoid the late trample on ceramic tile.

4. Beauty before installing cabinet seam

many owners also affix ceramic tile on the wall, toilet and kitchen, for example, these two places also needs to be done on the wall of the sand texture beauty seam, should be installed in the cabinet before the construction. Because after the cabinet installed, some cracks is blocked, can't do all the seam, in order to avoid this kind of embarrassment, but also to leave no gap blind Angle, can do before installing the ambry colour sand seam.

the construction procedure of epoxy sand texture than simple seam an agent a lot, but there are places they need to pay attention to, if you have any question, may carry on the discussion in the comments below, don't know if you have to do the color sand?