Epoxy grout manufacturer construction ground moisture to with what method to deal with

Epoxy grout manufacturer construction ground moisture to with what method to deal with.

floor is the part of the underlying room and soil contact, it bear the load of the room, have certain strength and stiffness requirements, and has moisture-proof, waterproof, heat preservation, the wear-resisting performance. Formation and building outdoors has a close relationship, to deal with the floor and the platform, the relationship between the steps and buildings along the ground, buildings and the site handover clear, harmonious whole. The epoxy floor level construction ground moisture to

how to deal with? It is well known that the moisture content of epoxy floor paint construction base concrete shall not be higher than 8%, high moisture content will seriously affect the construction quality of epoxy floor paint, can make the floor coating adhesion is poor, bubble surface, as well as the delaminating phenomenon.

there get damp has several main reason, ( 1) ） Is the late spring and early summer temperatures rise, the spring rain, the air humidity is big, continuous cause indoor air saturated state; The second is the ground temperature increase slowly, in a short period of time has not been improved. When wet saturated air through the low temperature on the ground, surface condensation. This phenomenon is commonly known as get damp. Good soil, when the soil of shallow buried, on the other hand, the embedded depth of foundation should be increased. （ 2) The underground water level. Based on best above ground water level. （ 3) Freezing depth. Embedded depth of foundation should be greater than the soil freezing depth of winter.

the epoxy floor level construction floor several processing customized to you talk about the ground wet method.

do the waterproof layer: the moisture content is higher, and the water content of concrete base has a rising trend, to do professional waterproof layer, waterproofing late lead to ground failure.

keep ventilation: the construction site construction site keep ventilation, air circulation flow can speed up the evaporation of the moisture from the concrete base, to improve epoxy floor paint with the cohesive force of the base.

heating: improving concrete base surface temperature can accelerate the evaporation of the water. Guangzhou force Turk suggest using air heating or radiation heating, cannot adopt fire heating, because fire heating can increase the fog in the air temperature, the water vapor condensation in the concrete. Moisture vapor transmission system:

moisture permeable system has extremely high moisture transmittance, ensures the base surface water vapor through coating escape, avoid foaming coating fall off, apply to can't install base level of the waterproof layer.

epoxy floor paint is suitable for some for sanitation requirements higher places such as hospitals the ground floor, pharmaceutical factory, food factory, workshop floor, lab building floor, room on the ground, etc. ; And requirements stamping corrosion wear resistance of the ground (such as underground parking lot, factory warehouse A forklift) And so on.