Epoxy grout manufacturer of oil situation how to deal with?

Epoxy grout manufacturer of oil situation how to deal with?

epoxy floor coating on concrete and so on the many kinds of excellent adhesion, curing shrinkage rate is low; Good water resistance, oil resistance, acid, alkaline, salt fog corrosion resistance and other chemical properties; At the same time with excellent abrasion resistance, stamping resistance, scrubbing resistance and other physical characteristics; When use is not easy to crack and easy to wash, easy to maintenance.

epoxy floor paint & ndash; — Environmental clean beautiful

along with the people environmental protection consciousness enhancement, development of water-borne epoxy floor coatings, high solid epoxy floor coatings, solvent-free epoxy floor coating epoxy floor coating is the development direction of the future.

floor coating has many benefits, but in the floor construction, pollution is a big problem, so in the construction, how are we to cope with this problem?

1, clean up the ground: before construction to the ground, remove impurities. And to return the equipment to do a good job of protection.

2, oil removal: where there is oil pollution can use artificial remove, or use a roast gun was carried out on the clear oil burning. Hydrochloric acid wash. The main play the role of an oil removal. The concentration of hydrochloric acid can't is too high, use 4 ~ 5%. For heavy oil, can push a few times more. Use this method to pay attention to safety, ventilation, if accidentally splashed with hydrochloric acid, need to rinse with plenty of water. Alkaline cleaning the ground. Use one kilogram of caustic soda and mix 20 kilograms of water, coating the ground, the purpose is to neutralize hydrochloric acid on the ground, however, the amount of hydrochloric acid is not greater than alkaline cleaning, because epoxy floor acid-proof alkali resistance.

epoxy floor paint with oil how to deal with?

3, grinding processing: using grinding machine burnish drops the surface corrosion of cement and oil, and then flush with large amounts of water on the ground.

4, dry processing: if ventilation is fine ground general can do for two days, wait for dry hind can be epoxy ground construction, bad situation will be a week, you can use the air conditioning or wet machine processing.