Epoxy grout manufacturer to explain how to maintenance and maintenance

Epoxy grout to explain how to maintenance the

1, avoid sun exposure, lest epoxy floor coating yellow discoloration.

2, avoid frequent flow boiling water or chemical solvent impregnated surface, so as to avoid softening occur epoxy ground.

3, shall not be more than 30% of the concentrated acid etching floor.

4, often have the ground of the chemical solvent used, have been dyed, light color is especially obvious on the ground, it is often not because the solvent itself, but by other medium of fall on the ground were dissolved, the pollution is generally difficult to remove, in addition, there are rust on the ground, such as polluted for a long time, the ground can't always clean, so should pay attention to avoid the situation.

5, and shall not impact floor directly with hard, sharp objects. Once you have unexpectedly sharp objects across the wound ( Can repair, but signs of) , scratches deep should be repaired in a timely manner, otherwise it will affect the surrounding the coating adhesion.

6, indoor welding and cutting construction, move bulky equipment must be ground cover, lest epoxy coating wear.

7, acid or alkaline cleaning flow after welding splatter must timely cleaning, daily if any spillage spices, oil can wipe with a rag.

8, clean up with water or weak alkaline detergents, daily cleaning can use broom or soft cloth to clean; Serious dirt, use a neutral detergent, use cloth washed, then wash with water, fully dry, hit a thin wax.

9, if you have the drum, lists, as well as the delaminating phenomenon, should contact the contractor in a timely manner.