First put the toilet or the seam?

Decorate should do the first seam reload toilet

the reason for this mainly from the waterproof effect and late start considering toilet maintenance. If install the toilet first, later shop sticks ceramic tile is bad, especially near the toilet position easily, seam may lead to leakage.

in the toilet first outfit, ceramic tile, behind the material such as cement mortar in construction process is easy to scratched the toilet. Bad mortar fell into the toilet clean, easy to cause the toilet jam, toilet to best in bricklayer's phase after the completion of the installation again.

the toilet construction joints must be cured completely, such as the seam an agent to contact water, beautiful seam an agent completely curing time in about 72 hours later, you can touch the seam and feel the hardness whether meet the requirements, if not completely curing need to continue to wait for, the lower the temperature to the longer the curing time

toilet do beautiful seam note

1, cannot use powder caulking agent before render the

toilet ceramic tile seam, never can use powdered things instead of caulking agent firstly, because the dust will be wrapped around the seam an agent, lead to too beautiful seam an agent and ceramic tile stick very well, the seam an agent after curing, prone to falls off phenomenon.

2, make sure that enough glue of ceramic tile aperture

before construction need to make sure the gaps between the tiles first meets do beauty, generally the seam demand gap around 3 mm, gap is too narrow also easy to cause loss, gap is too wide beautiful seam an agent needs to dose will multiply, construction difficulty will increase.

3, seam to ensure clean ceramic tile aperture

in the United States for the first cleaning in the ceramic tile aperture clean again construction, if the dirt is beautiful seam cracks, affect the service life of the seam an agent and effect.

4, to ensure that the

ceramic tile ceramic tile aperture drying after the shop is stuck to need to wait for a period of time, such as gaps in the beauty of the reentry after evaporation drying seam. If the construction environment is too wet, moisture evaporates to infiltrate beauty in seam an agent had not been dried, and affect the sewing effect.