Floor paint construction share non-slip ramp construction technology

Floor paint construction share non-slip ramp construction technology

basic level processing:

1 adopted concrete polishing machine completely polished concrete surface at the grassroots level to remove surface laitance, loose animals, and sundry grain, clean up the surface oil and other adverse to the cohesive force of organic matter.

2。 Coat construction: epoxy coat is designed to make epoxy resin penetration into concrete at the grass-roots level, and to form a strong bond, provide a good interface for the upper construction.

3。 Epoxy mortar layer construction: batch coating epoxy mortar, check table dry bottom coating, judge whether the construction conditions of the epoxy mortar, measuring part A and part B according to requirements of the material and high quality quartz sand, stir well, form epoxy mortar. The flatness of the ground using batch knife with epoxy mortar to get.

4。 Epoxy putty layer construction: adopting the special construction epoxy putty scraper, two, for the ground of the poor should add blow be bored with child. The first time can be bored with child after drying under construction putty. When construction, flat on the ground conditions at any time, and through the technique control leveling the ground.

5。 Quartz sand and zabbud: spread quartz sand is the purpose of increase the skid resistance of the ground, form slide effect. Construction process according to certain proportion dosage and quartz aggregate, until the surface of quartz sand aggregate even, so far. After strong coating binding, such as quartz sand, with a broom sweeping not bonded solid particles, the construction of next working procedure can be achieved.

6 epoxy coating construction: according to the ratio of material requirements, then stir well. Using special construction paint roller, a total of two. Edges and color brush is used for the segmentation part construction,.

7, the site clean.