Floor paint film formation and prevention of peeling coating surface

, at the end of the floor lacquer should pass ( Such as mortar, putty layer) , coating, surface coating multilayer coating curing after forming effective protection and decorative coating, can achieve multiple protective. Floor paint construction personnel should be familiar with the construction of the lacquer disease, timely eliminate coating quality problems effectively take precautions. Epoxy floor paint not easily used in outdoor coating, after construction, the environment of the coating exposed to the sun, causing coating surface drying too quickly, coating surface contraction tucked up, make it easy to appear wrinkling peeling phenomenon.

with floor paint in construction, high quality floor paint, also should have dense, flat base, and expertly construction technology. Floor paint peeling one of the reasons is the foundation and coating the surface of the bonding effect is not good to cause coating peeling off, prevention floor coating surface peeling is from caking, those reasons will affect material and adhesive: before the basis of basic material of ground too smooth will weaken the adhesion, improper selection floor paint materials supporting construction personnel of technology or poor construction environmental factors will lead to ground surface peeling.

1, floor paint materials adhesive bonding performance is poor, ultra-high hardness materials after the film surface will guide often will reduce smoothing primer with mortar coating or coating the coherence between the force performance effect.

2, surface treatment is poor or too smooth floor paint peeling Achilles' heel, floor lacquer is based on the surface of paint before painting with oil, wax, moisture, dust and chemicals, etc. Or a surface to paint after pretreatment work interval time is too long before coating surface should be clean, and shall be immediately coating construction.

3, construction personnel technical quality is the key of epoxy floor project, if not improper construction technical personnel of the control quality of the construction site will appear a lot of hidden dangers such as: the performance of the material and construction of foundation ground environment estimate, the construction of the high temperature coating area is big, should pay attention to material proportioning, haven't sports ground floor construction will start curing all the floor paint film did not flow flat or surface peeling is rough, take off a layer of quality problems.

4, inexperience, construction personnel during construction efforts can't control the size, can appear uneven thickness of coating or coating is too thick, not work into the next process, causes the coating not sticky, delaminating and other issues.