Floor tile seam construction steps method

Home floor tile steps in the construction joints

1, in the use of glue guns to crack playing beautiful seam an agent don't play too long at a time. The seam an agent is a kind of quick-drying products, after 20 minutes of sealant to shave. There are a lot of customer is the first home beauty seam an agent does not understand, a dozen beautiful seam an agent for more than 20 minutes, then too late to process solidifies, the but again after solidification rave considerable trouble.

2, a two-component seam an agent using internal and external rubber blend mode, if there is no construction of more than 20 minutes, the seam an agent within the hose will solidify, pay attention to during the construction time limit.

3, seam an agent to use in the United States for the crack must not have water. Before doing the seam must not standing water on the ground. If you have any water on the ground the seam an agent will not frozen, if you have any water for a long time the seam an agent will keep solidification state for a long time. Can produce the effect not beautiful.

4, avoid touching eyes and skin contact not completely cured material for a long time, and do not let children touch.

5, in the cross interface more small brick construction should be painted in the first vertical seam, then apply the principle of the horizontal seam, in the cross intersection, here, note the seam an agent after scraping to skip blow gently, make less beautiful seam an agent into the cross stitch.

6, use should be taken before the seam an agent to clean up the dust in the ceramic tile aperture, ceramic tile seam on both sides of the towel clean, remove dust, grease and other pollutants, at the same time with clean shovel to remove contaminants on the surface of the ceramic tile.

7, and the size of the nozzle according to ceramic tile seam cut off part, suggest smaller than ceramic tile seam.

the seam an agent factory small make up comment on:

the ceramic tile seam an agent is composed of high-tech new polymer and high-grade paint, it is different from white cement, color caulking agent ( Dry powder cement material + low pigment) Is mainly composed of inorganic material, he is a new high-tech polymer materials + high-grade paint and special additives with fine. He is upgrading of products, the effect is natural better than old product, but also must pay attention to the construction, also mentioned above a lot of points. Don't look at the feeling is very simple, easy to operation problem, or for safe and beautiful sex or find a better master of professional beauty.