Professional manufacturer of tile grout and adhesives with 27 years experience

Floor tile seam per square price ( The seam construction considerations)

2020-12-04

Kastar

127

Ceramic tile ceramic tile when the seam is our essential one step, and fill the seam an agent can increase the aesthetic of ceramic tile very well. So everyone in decorating, also is compared to the value. Below small make up seam floor brick is to introduce to you the price of every square and use the seam an agent to pay attention to what matters.

a, floor tile seam per square price

1, construction seam floor tile the price per square in a different way in a different way,

construction seam floor tile beauty per square price also is different, choose half a pack of construction, in addition to the cost of the seam an agent, still need to increase the price of the seam construction, the cost of per square meter in about 15 30 yuan between. If choose turnkey construction, the price is not unified, will be affected by region, construction personnel qualifications, in about 30 - per square meter 60 yuan between.

seam floor tile the price per square 2,

specifications are different specifications for different beauty of ceramic tile seam, the price, of course, also there is a big gap, in general, the higher the price of the specifications and the smaller the ceramic tile seam, after all specifications of small ceramic tile per square meter needs to do more beauty, especially the beauty of Mosaic seam is the most expensive price, and the small specification of ceramic tile seam about 20 yuan per square meter price, the large size ceramic tile seam per square meter price in 15 20 yuan between.

the seam an agent to note

clean ceramic tile aperture first must be removed to just go, to do dry dust in this way, you can begin to make this kind of products to fill. Construction preparation work

it is important to note that is played before construction glue need not about 40 cm long, this is to prevent the front rubber mixing unevenly.

glue timeout handling

in the process of construction, such as more than 15 minutes without continuous glue (more than can be used when the time About 20 minutes) Later, you can inject colloid in mixing tube, can be together with the mixing tube has been gradually solidified preservation, for next time use, replace the new mixing tube again can continue to use.

dry, clear overflow

after construction is also to pay attention to wait until after the seam an agent surface slightly dry, and then to wipe out the overflow.

glue guns use

such as construction, where temperature below 15 ℃ and the high viscosity is not easy to play with glue gun, this product can be in hot water ( 60 - 80℃) Soak 10 - 20 minutes or uniform electric hair dryer blowing in general almost more than 10 minutes, the glue is ok.

floor price and use the seam per square seam an agent to pay attention to what matters related to this, as to how much is the price, also is no uniform standard, not only need to be decided according to the size of ceramic tile, also depends on your choice of material grades.