Fuzhou K11 waterproof coating using guide

Fuzhou K11 waterproof paint is a two-component, acrylic acid high polymer modified cement based waterproof material, is non-toxic harmless, breathable performance is good, the advantages of good waterproof effect, is quite favored by consumers. Zhengde building materials to introduce K11 waterproof coating construction strategy, fuzhou for your household waterproof construction reference. A, 1 base treatment, surface must be smooth, firm, clean, no grease, no dust, and other animals. 2, obvious gap in cement mortar and sand holes must be blocked, smoothing, sharp edges should be removed. 3, no water wettability substrate to prevail in advance. 4, the new pouring concrete due and certain dry solid curing time, prevent the dry shrinkage of concrete. 5, the old concrete surface must rinse off with clear water, besmear to brush after dry. 2, 1, the construction method will powder slowly pour liquid grout and stirring constantly, until the mixing into a smooth paste and no small particles and bubbles and can be used. 2, directly with brush or roller besmear brushs mucilage base surface, do not leak brush, to prevent precipitation, should maintain a discontinuity in the process of mixing operation. 3, general besmear to brush two times ( The direction of the coating should be staggered) Keep in 1, the final coating thickness. 0 - 1. The amount of 1-2 mm, 2kgm2。 4, in besmear to brush at the same time, in the corner joint and crack of non-woven fabric or glass fiber reinforced, to enhance cracking tensile performance, waterproof membrane directly stickup ceramic tile, must make the waterproof membrane coating surface completely cover base material, in order to achieve waterproof effect. 3, 1, construction matters needing attention of construction shall ensure that the product completely covered in the base level, curing rear can undertake other work 24 hours a day. 2, the requiring higher wearability such as pedestrian tunnel, to be followed by hardening layer of protective film layer are not destroyed. 3, requirements in 5 ~ 40 ℃ temperature environment construction. 4, avoid by all means will have hard mucilage water mixing before use.

Kastar Adhesive Co.,Ltd. have now decided to extend our company in other countries.

During Kastar Adhesive Co.,Ltd.’s existence in a market we didn’t receive any negative feedback from our customers.

best grout sealer tile grout may be adapted for use at any floor grout sealer and is suitable for shower tile grout sealer.

Turn to Kastar Adhesive Co.,Ltd. if you are looking for premier professional grout solution, affordable packages, and quality tile grout products! We produce wide series of high quality, first-class , and provide professional tile grout services at great prices.

While manufacturing tile grout, we always pay attention to the technology and quality of the product.