【 Fuzhou waterproof 】 Cement based waterproof coating construction technology

For cement based waterproof coating during the period of construction, to this kind of waterproof project construction technology must be in accordance with the relevant provisions of the state of go, otherwise, will thus led to the suspension of waterproof construction engineering, and will thus affect the quality of building waterproof, below with fuzhou zhengde building materials waterproof material manufacturer to see details about cement-based waterproof coating construction technology. For cement based waterproof coating construction craft, we need to understand a little, the premise must be ready to construction when the use of tools, for example, to prevent water to clean, or use the awl is a shovel, and the broom, and so on, with tie-in ingredients, using the mixing barrel and hand blender, or water metering cup, etc. , coatings using a tool, you can choose to use rubber scraper or paint brush, and the soft brush items, measuring cutting tools you can use the steel tape, chalk line and wallpaper knife and so on. At the beginning of construction, clean up the fugitive dust and dirt at the grass-roots level is particularly important, ensure that at the time of construction, to stop at the grass-roots level surface to see cracks or irritability is pollution, if there is a rough place, must use tools to leveling. Material preparation, can stir the paint tool materials comparison, the use of paint in cooperative methods pour liquid into the mixing barrel, under the condition of the portable stirring barrels, stir in coatings for continuously, keep in fifteen minutes. Then use the roller to daub the wall, in the disposal of the details of the waterproof layer, like pipes, Angle of Yin and Yang, or the waterproof construction joint and other places, have to make timely leveling and dirt processing, ability construction, followed by three to the coating procedure is completed, to do a good job of acceptance of the waterproof layer.