Fuzhou waterproof coating application and construction points for attention

Fuzhou waterproof coating is a dedicated to building waterproof two-component waterproof material, by powder and liquid ratio according to certain proportion. Fine powder by high quality cement and unique active material composition, but it is the high technology of polymer and the liquid fertilizer fusion. Besmear to brush in the two groups after material mixing cement base surface to achieve waterproof effect. Fuzhou waterproof coating is mainly used for surface and back surface waterproof engineering, sealing of tiny cracks, applicable to the basement, civil air defense projects, subway tunnel, kitchen, bathroom, balcony, swimming pool, reservoir, sewage treatment ponds and other parts, as well as the shop installs wooden floor and wall decoration materials before the moistureproof processing. Suppression of alkali type waterproof coating is often used as metope whiskering, mouldproof protection products after processing. Fuzhou waterproof coating note: 1, the construction at the grass-roots level should reach enough strength and curing period, before the construction must fully wet with water. 2, construction temperature 5 ℃ to 35 ℃, avoid the strong sunlight, rain and strong winds blow. 3, open after the paste must be used up within 2 hours, longer construction clearance, advice before use to stir again, avoid pulp precipitation, conjunctival pulp do not add water to use. 4, tools and equipment immediately after using water cleaning, otherwise you need to remove mechanical way. 5, construction within 48 hours after it is strictly prohibited to trample, avoid scratching on touch, hard objects, such as impact phenomena. 6, this product contains cement ingredients when using, pay attention to protect skin and eyes will wash eyes by application or go to a doctor.