Professional manufacturer of tile grout and adhesives with 27 years experience

Glass glue gun use guide ( Use the skills)

2020-12-04

Kastar

128

What is glass glue gun

glue gun in the application of life, believe everyone not unfamiliar, such as the crack of the door of the house is leaking, use glue gun on sealant, leakage problem will be solved, the body of the weld, playing on sealant, can not only reduce noise, and can play the role of rust. Glass glue gun can be divided into manual glue guns, pneumatic glue guns, electric glue gun three types. Widely used in building decoration, electronic appliances, automobile and auto parts, ships and container, etc.

how to use glass glue gun?

1, press the switch at the back of the glue guns, another hand pull out the bolt;

2, use scissors to cut glass glue at the top of the gate; Scissors don't cut into the thread;

3, the glass glue of mouth to cut out of the gate;

4, of the good rubber mouth glass glue flat in the glue guns; Press the glue guns at the back of the switch, push forward the bolt, hold the glass hose;

5, the cement on the need for the position of the glass glue; Hard pressed the trigger of glue gun, glue injection to the need to position;

6, finally, scrape to evenness with scraper to play good glass glue, decorate evenly; After the glass glue, is typically an hour surface can be vulcanized; 24 hours to dry; During the period of the best related items to other methods in place, and don't shake.

glass glue gun, glue is slow?

couldn't make the glue guns, not crowded, as I want to had not enough, to force does not reach the designated position, rubber mouth opening is too small. If these three reasons for this, it is need to choose a pair of glue guns, increasing, the rubber mouth mouth cut a few bigger. Use glass glue guns when there is certainly a need to use glass glue, glass glue usage is also key. First in the know how to choose a qualified glass glue, do not covet is cheap, quality is the most important. If used on the glass and profile recommended acidity glass glue, if you use between profiles with wall body, then selecting the neutral is more appropriate. Use a knife to cut the glass glue outlet first, and then take out the glue guns, will put his hand to pull, and then in a glass glue. With glue gun hand by hand to promote the fixed glass glue, relax the thumb part, squeeze will glue guns in glass rubber extrusion.