Glue stick steel construction process

Glue stick steel glue stick steel construction process 1, the basic process of concrete and steel sticking glue on the surface of the steel processing - fixed component selection and manufacture - made CARDS the & # 174; Stick type steel structure rubber - coated adhesive beautiful seam an agent and pasting steel plate to fixed, pressure, curing, dismantled fixed compression artifacts to quality inspection, surface protection, anti-corrosion treatment - completion of acceptance. 2, sticking steel glue adhesive construction process (1) surface treatment: Angle of concrete surface with grinding machine until the new face, clear the dust and clean; With Angle steel mill grinding coarsening; (2) the preparation of fixed member: according to the process requirements and paste from different parts of the situation, choose a different method of fixed; (3) glue: first, to A and B components mix separately, then put A, B two components according to weight ratio 3:1 into container, using electric mixer or other bar uniform stirring, until the color is consistent, general glue to A 6 - at A time It is advisable to 10 kg. Adhesive (4) : the mix of adhesive, coating to the glued surfaces, general rubber 2 mm thick, on both sides of the middle thick thin, then for bonding and pressure, make the gum from all round the overflow. After 24 hours, can discharge pressure and fixed facilities; (5) to be sticky content and the construction quality inspection, decorated surface anti-corrosion treatment and other processing.